how to reset kitchenaid dishwasher kdtm404kps manual

User Manual & Reset Guide

KDTM404KPS Model

Reset Methods

Tools Needed:

  • Soft cloth
  • Flashlight (optional)
  • Safety gloves

Step-by-Step Reset Procedures

  1. Power Cycle Reset: Turn off the dishwasher at the circuit breaker or unplug it from the power outlet. Wait 5 minutes, then restore power.
  2. Control Lock Reset: Press and hold the "Heated Dry" and "Start" buttons simultaneously for 3 seconds to reset control lock.
  3. Factory Reset: Press and hold "Heated Dry" and "Normal" buttons for 5 seconds until all lights flash, then release.
  4. Drain Reset: If dishwasher won't drain, check drain hose for clogs and ensure garbage disposal is clear if connected.
  5. Error Code Reset: For persistent error codes, perform power cycle reset and run diagnostic cycle.
  6. Water Supply Reset: Ensure water supply valve is fully open and check for kinks in water inlet hose.
  7. Test Run: After reset, run a quick rinse cycle to verify proper operation.
Warning: Always disconnect power before performing any maintenance. Consult professional service for complex issues.

Specifications

Model Number KDTM404KPS
Type Built-in Dishwasher
Color PrintShield™ Stainless Steel
Place Settings 14 Place Settings
Noise Level 44 dBA
Control Type Electronic Touch Controls
Energy Rating ENERGY STAR® Certified
Water Consumption 2.9 gallons per cycle
Power Requirements 120V, 60Hz, 15A
Dimensions (HxWxD) 33.75 x 23.56 x 22.56 inches
Weight 95 lbs
Wash Cycles 5 Wash Cycles + Options

Warranty Information

  • Full Warranty: 1 year parts and labor
  • Extended Warranty: 5 years on tub and motor
  • Additional Coverage: Optional protection plans available

For warranty service, contact KitchenAid Customer Service at 1-800-422-1230 or visit KitchenAid.com

Key Features

ProWash™ Cycle

Automatically adjusts water temperature, wash time, and spray arm motion to clean dishes effectively while saving energy and water.

PrintShield™ Finish

Stainless steel exterior resists fingerprints and smudges, maintaining a clean appearance with minimal maintenance.

Third Level Rack

Additional top rack provides extra space for utensils and small items, increasing loading flexibility and capacity.

Hard Food Disposer

Built-in food disposer grinds up food particles, eliminating the need for pre-rinsing dishes before loading.

Clean Water Wash System

Filtration system with hard food disposer ensures clean water is recirculated throughout the cycle for optimal cleaning.

Quiet Operation

Sound insulation and advanced motor technology provide quiet operation at only 44 dBA.

Wash Cycle Options

ProWash

Automatic cycle that senses soil level and adjusts accordingly

Heavy

Intensive cleaning for pots, pans, and heavily soiled items

Normal

Standard wash for everyday dishes with normal soil

Light

Quick wash for lightly soiled dishes and glassware

Rinse Only

Rinses dishes without detergent to prevent drying

Sanitize

High-temperature wash that eliminates 99.9% of bacteria

Troubleshooting

Problem Possible Cause Solution
Dishwasher won't start Power issue, door not latched, control lock enabled Check power supply, ensure door closure, disable control lock
Poor cleaning results Spray arms blocked, incorrect detergent, overloaded Clean spray arms, use recommended detergent, proper loading
Water not draining Drain hose clogged, air gap blocked, filter dirty Clear drain obstructions, clean air gap, clean filter
Leaking water Door seal damaged, overfilling, loose connections Inspect door gasket, check float switch, tighten connections
Unusual noises Foreign objects in pump, spray arm obstruction Check for debris, ensure spray arms rotate freely
Error codes displayed Sensor failure, electrical issues, component failure Perform reset procedure, check error code meaning

Common Error Codes

  • F1/F2/E1: Water fill issue - Check water supply and inlet valve
  • F3/E2: Drain issue - Check drain hose and pump
  • F4/E3: Temperature sensor issue - Contact service
  • F5/E4: Heater issue - Check heating element
  • F6/E5: Motor control issue - Perform reset
  • F7/E6: Overflow detected - Check float switch

Manual Downloads

Current Model Manuals

KDTM404KPS

Built-in Dishwasher

KDTE204KPS

24" Built-in Dishwasher

KDTM354KPS

PrintShield Dishwasher

KDTE334GPS

Stainless Steel Dishwasher

Popular Previous Models

KUDC03FKSS

24" Built-in Dishwasher

KUDE48FXSS

48 dBA Dishwasher

KDFE454KPS

Stainless Steel Model

KDTE104KPS

Essential Series

Note: For models not listed here, please visit the KitchenAid Support Website for complete documentation.