KitchenAid Dishwasher KDFE104DSS

User Manual & Installation Guide

Built-In Dishwasher

Installation Guide

Tools Needed:

  • Adjustable wrench
  • Level
  • Screwdrivers (flat and Phillips)
  • Pipe wrench
  • Tape measure
  • Drill with bits

Step-by-Step Installation

  1. Prepare Installation Area: Ensure cabinet opening meets required dimensions and has proper electrical and plumbing connections.
  2. Remove Shipping Materials: Remove all protective films, tapes, and shipping braces from the dishwasher interior and exterior.
  3. Connect Water Supply: Connect hot water supply line to the water inlet valve using approved dishwasher connector.
  4. Connect Drain Hose: Route drain hose to drain connection with high loop to prevent backflow into dishwasher.
  5. Electrical Connection: Connect to dedicated 120V, 60Hz, 15A circuit. Follow local electrical codes for proper grounding.
  6. Position and Level: Slide dishwasher into cabinet opening and adjust leveling legs to ensure proper alignment with countertop.
  7. Secure to Countertop: Use mounting brackets to secure dishwasher to underside of countertop.
  8. Test Operation: Run dishwasher through a complete cycle to check for leaks and proper operation.
Warning: Installation must be performed by qualified professional to ensure proper operation and maintain warranty coverage.

Specifications

Model Number KDFE104DSS
Type Built-In Dishwasher
Color/Finish Stainless Steel
Place Settings 14 Place Settings
Noise Level 44 dBA
Control Type Hidden Touch Controls with LED Display
Energy Rating ENERGY STAR® Certified
Water Consumption 2.9 gallons per cycle
Power Requirements 120V, 60Hz, 15A
Dimensions (HxWxD) 33.75 x 23.56 x 22.56 inches
Weight 105 lbs
Wash Cycles 6 Wash Cycles + 4 Options

Warranty Information

  • Full Warranty: 1 year parts and labor
  • Stainless Steel Tub Warranty: 10 years limited
  • Rack Warranty: 5 years limited
  • Additional Coverage: Optional extended warranty available

For warranty service, contact KitchenAid Customer Service at 1-800-422-1230 or visit KitchenAid.com

Key Features

ProWash™ Cycle

Advanced sensor technology automatically adjusts water temperature, amount, and cycle time to deliver optimal cleaning results for every load.

FreeFlex™ Third Rack

Adjustable third rack with fold-down tines provides extra space for utensils and small items, maximizing loading flexibility.

Stainless Steel Interior

Premium stainless steel tub resists stains, odors, and chipping while providing superior durability and cleaning performance.

Hard Food Disposer

Built-in hard food disposer eliminates the need for pre-rinsing by grinding up food particles during the wash cycle.

Quiet Operation

Advanced sound insulation and quiet motor operation ensure 44 dBA quiet performance for peaceful kitchen environment.

Heated Dry Option

Optional heated drying provides superior drying performance, especially for plastic items that typically don't air dry completely.

Wash Cycles Explained

ProWash

Automatically adjusts for optimal cleaning of mixed loads

Heavy

Intensive cleaning for pots, pans, and baked-on foods

Normal

Standard cleaning for everyday dishes and tableware

Light

Quick wash for lightly soiled dishes and glassware

Rinse Only

Rinses dishes without detergent to prevent drying

China/Crystal

Gentle cycle for delicate china, crystal, and fineware

Troubleshooting

Problem Possible Cause Solution
Dishwasher won't start Door not latched, power issue, child lock engaged Ensure door is closed completely, check power supply, verify child lock status
Poor cleaning results Overloading, incorrect detergent, spray arms blocked Rearrange load properly, use recommended detergent, check spray arm rotation
Water not draining Drain hose clogged, filter blocked, drain pump issue Check drain hose for kinks, clean filter, inspect drain pump
Leaking water Door not sealed, overfilling, loose connections Check door gasket, ensure proper loading, check water connections
Unusual noises Spray arm hitting items, foreign objects in pump Rearrange load to clear spray arms, check for foreign objects
Dishes not drying Heated dry off, rinse aid empty, improper loading Enable heated dry, refill rinse aid, improve air circulation

Error Codes

  • F1: Water heating issue - Check heating element and temperature sensor
  • F2: Water fill issue - Check water supply and inlet valve
  • F3: Drain issue - Check drain hose and pump
  • F4: Water leak detected - Check for leaks and water supply
  • F5: Door switch issue - Ensure door is properly closed
  • F9: Control board communication error - Reset dishwasher

Manual Downloads

Current Model Manuals

KDFE104DSS

Built-In Dishwasher Stainless

KDFE204DSS

Built-In Dishwasher with FreeFlex

KDTE204DSS

Top Control Dishwasher

KDPE234DSS

Professional Series Dishwasher

Popular Previous Models

KUDC03FXSS

Classic Series Dishwasher

KDFE454DSS

Built-In with Third Rack

KDTM354DSS

Stainless Tall Tub

KUDE48FXSS

Energy Efficient Model

Note: For models not listed here, please visit the KitchenAid Support Website for complete documentation.