KitchenAid Dishwasher KDFE204KPS

Owners Manual & Installation Guide

Built-in Dishwasher

Installation Guide

Tools Needed:

  • Adjustable wrench
  • Level
  • Screwdrivers (flat and Phillips)
  • Pliers
  • Tape measure
  • Pipe cutter

Step-by-Step Installation

  1. Prepare Installation Area: Ensure cabinet opening meets required dimensions and has proper electrical and plumbing access.
  2. Remove Shipping Materials: Remove all protective packaging, shipping brackets, and tape from the dishwasher.
  3. Connect Water Supply: Connect hot water supply line to the water inlet valve. Use only new braided stainless steel hoses.
  4. Connect Drain Hose: Route the drain hose to the drain connection with a high loop to prevent backflow into the dishwasher.
  5. Electrical Connection: Connect to a properly grounded 120V, 60Hz, 15A dedicated circuit. Follow local electrical codes.
  6. Level the Dishwasher: Adjust the leveling legs to ensure the dishwasher is level from front to back and side to side.
  7. Secure to Countertop: Use mounting brackets to secure the dishwasher to the underside of the countertop.
  8. Test Run: Run the dishwasher through a complete cycle to check for leaks and proper operation.
Warning: All installations must be performed by a qualified installer to ensure proper operation and maintain warranty coverage.

Specifications

Model Number KDFE204KPS
Type Built-in Dishwasher
Color PrintShield™ Stainless Steel
Place Settings 14 Place Settings
Noise Level 44 dBA
Control Type Hidden Touch Controls with LED Display
Energy Rating ENERGY STAR® Certified
Water Consumption 2.9 gallons per cycle (Normal Wash)
Power Requirements 120V, 60Hz, 15A
Dimensions (HxWxD) 33.75 x 23.56 x 22.63 inches
Weight 95 lbs
Wash Cycles 5 Wash Cycles + 5 Options

Warranty Information

  • Full Warranty: 1 year parts and labor
  • Extended Warranty: 5 years on tub and door liner
  • Additional Coverage: Optional extended warranty available

For warranty service, contact KitchenAid Customer Service at 1-800-422-1230 or visit KitchenAid.com

Key Features

ProWash™ Cycle

Automatically adjusts water temperature, wash time, and spray arm motion to clean dishes thoroughly the first time, eliminating the need to re-wash.

PrintShield™ Finish

Resists fingerprints and smudges to maintain the beautiful stainless steel appearance with minimal cleaning required.

Third Level Rack

Additional upper rack provides extra space for utensils, spatulas, and other small items, increasing loading capacity to 14 place settings.

FreeFlex™ Third Rack

Adjustable tines on the third rack fold down to accommodate taller items while maintaining optimal cleaning performance.

Hard Food Disposer

Built-in hard food disposer grinds up food particles, eliminating the need to pre-rinse dishes before loading.

Advanced Clean Water Wash System

Multi-filtration system with hard food disposer and fine mesh filter ensures optimal cleaning performance throughout the cycle.

Wash Cycles Explained

ProWash

Automatically adjusts cycle for optimal cleaning of everyday loads

Normal Wash

Standard cycle for daily use with normally soiled dishes

Heavy Wash

Intensive cleaning for pots, pans, and heavily soiled items

Light Wash

Quick cycle for lightly soiled dishes and glassware

Rinse Only

Rinses dishes without detergent to prevent drying on

Sanitize

High-temperature cycle that reduces 99.9% of bacteria

Troubleshooting

Problem Possible Cause Solution
Dishwasher won't start Power issue, door not closed properly Check power supply, ensure door is latched completely
Poor cleaning results Overloading, wrong detergent, spray arms blocked Reduce load size, use correct detergent, check spray arms
Water not draining Drain hose clogged or kinked Check drain hose for obstructions or kinks, clean filter
Leaking water Door not sealed, overfilling, loose connections Check door seal, ensure proper detergent amount, check connections
Unusual noises Foreign objects in pump, spray arms hitting dishes Check for foreign objects, rearrange dishes properly
Dishes not drying Rinse aid empty, high humidity, plastic items Refill rinse aid, use heated dry option, separate plastic items

Error Codes

  • F1: Water supply issue - Check water supply and inlet valve
  • F2: Drain issue - Check drain hose and pump
  • F3: Temperature sensor issue - Contact service center
  • F4: Heater issue - Contact service center
  • F5: Door switch issue - Ensure door is fully closed
  • F7: Motor control issue - Contact service center

Manual Downloads

Current Model Manuals

KDFE204KPS

Built-in Dishwasher with ProWash

KDTE204KPS

Top Control Built-in Dishwasher

KDPE234KPS

Built-in Dishwasher with FreeFlex

KDFE454KPS

Built-in Dishwasher with Third Rack

Popular Previous Models

KDFE104HPS

Built-in Dishwasher

KUDE48FXSS

Built-in Dishwasher with Controls

KDTM354DSS

Built-in Dishwasher with PrintShield

KDFE202DSS

Built-in Dishwasher with Third Rack

Note: For models not listed here, please visit the KitchenAid Support Website for complete documentation.