Installation Guide
Tools Needed:
- Adjustable wrench
- Level
- Screwdrivers (flat and Phillips)
- Pipe wrench
- Tape measure
- Drill with bits
Step-by-Step Installation
- Prepare Installation Area: Ensure cabinet opening meets required dimensions and is level, clean, and free of debris.
- Remove Shipping Materials: Remove all protective films, tapes, and shipping brackets from the dishwasher interior and exterior.
- Connect Water Supply: Connect hot water supply line to the water inlet valve using proper fittings. Recommended water temperature: 120°F (49°C).
- Connect Drain Hose: Route drain hose to drain connection with high loop or air gap to prevent backflow into dishwasher.
- Electrical Connection: Connect to a dedicated 120V, 60Hz, 15-amp circuit with proper grounding. Follow local electrical codes.
- Position and Level: Slide dishwasher into opening and adjust leveling legs to ensure unit is level and properly aligned with cabinetry.
- Secure to Countertop: Attach mounting brackets to underside of countertop to secure dishwasher in place.
- Test Run: Run dishwasher through a complete cycle to check for leaks and proper operation.
Specifications
| Model Number | KDPE234GPS |
| Type | Built-In Dishwasher |
| Color/Finish | Stainless Steel / PrintShield™ Finish |
| Place Settings | 14 Place Settings |
| Noise Level | 44 dBA |
| Control Type | Hidden Touch Controls with LED Display |
| Energy Rating | ENERGY STAR® Certified |
| Water Consumption | 2.9 gallons per cycle (Normal Wash) |
| Power Requirements | 120V, 60Hz, 15A |
| Dimensions (HxWxD) | 33.75 x 23.56 x 24.56 inches |
| Weight | 95 lbs |
| Drying System | ProDry® System with Heated Dry |
Warranty Information
- Full Warranty: 1 year parts and labor
- Stainless Steel Tub Warranty: Limited lifetime warranty
- Racks Warranty: 10 years
- Additional Coverage: Optional extended warranty available
For warranty service, contact KitchenAid Customer Service at 1-800-422-1230 or visit KitchenAid.com
Key Features
ProWash™ Cycle
Automatically senses soil levels and adjusts water temperature, wash time, and spray motions for optimal cleaning performance on every load.
ProDry® System
Advanced drying system with a heated dry option that uses a fan and condensation drying to thoroughly dry dishes, plastics, and hard-to-dry items.
Third Level Rack
Extra upper rack provides additional space for utensils, small plates, and cooking tools, increasing loading capacity and flexibility.
FreeFlex™ Tines
Adjustable and fold-down tines in all racks allow for customized loading to accommodate large pots, pans, and oddly shaped items.
PrintShield™ Finish
Stainless steel exterior resists fingerprints and smudges, maintaining the clean appearance of your dishwasher with minimal maintenance.
Quiet Operation
Sound insulation and advanced motor technology provide quiet operation at just 44 dBA, allowing for use during family time or entertaining.
Wash Cycle Options
ProWash
Automatically adjusts for optimal cleaning of everyday loads
Heavy
Intensive cleaning for pots, pans, and baked-on foods
Normal
Standard wash for everyday dishes with normal soil
Light
Quick wash for lightly soiled dishes and glassware
Rinse Only
Rinses dishes without detergent to prevent drying
Crystal/China
Gentle wash with lower temperature for delicate items
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Dishwasher won't start | Door not latched, power issue, child lock engaged | Ensure door is fully closed, check power supply, verify child lock status |
| Poor cleaning results | Overloading, incorrect detergent, spray arms obstructed | Rearrange load properly, use recommended detergent, check spray arm rotation |
| Water not draining | Drain hose clogged, filter blocked, drain pump issue | Check drain hose for obstructions, clean filter, inspect drain pump |
| Leaking water | Door not sealed, overfilling, loose connections | Check door seal and gasket, ensure proper loading, check water connections |
| Unusual noises | Spray arms hitting dishes, foreign objects in pump | Rearrange load to prevent obstruction, check for foreign objects |
| Dishes not drying | Heated dry disabled, rinse aid empty, overloading | Enable heated dry option, refill rinse aid, reduce load size |
Error Codes
- F1: Water fill issue - Check water supply and inlet valve
- F2: Drain issue - Check drain hose and pump
- F3: Temperature sensor issue - Contact service center
- F4: Heater issue - Contact service center
- F5: Door switch issue - Ensure door is fully closed
- F7: Motor control issue - Contact service center
Manual Downloads
Current Model Manuals
KDPE234GPS
Built-In Dishwasher with ProWash
KDPE234GSS
Stainless Steel Built-In Dishwasher
KDTE234GPS
Top Control Built-In Dishwasher
KDTM354ESS
24" Built-In Dishwasher
Popular Previous Models
KDFE454DSS
44 dBA Built-In Dishwasher
KUDE48FXSS
48 dBA Built-In Dishwasher
KDFE204DSS
Economy Built-In Dishwasher
KUDC03FXSS
Classic Built-In Dishwasher