KitchenAid Dishwasher KDPM354GPS0

User Manual & Installation Guide

Built-in Dishwasher

Installation Guide

Tools Needed:

  • Adjustable wrench
  • Level
  • Screwdrivers (flat and Phillips)
  • Pliers
  • Tape measure
  • Pipe cutter

Step-by-Step Installation

  1. Prepare Installation Area: Ensure cabinet opening meets required dimensions and has proper electrical and plumbing connections.
  2. Remove Shipping Materials: Remove all protective packaging, tape, and shipping brackets from the dishwasher.
  3. Connect Water Supply: Connect hot water supply line to the water inlet valve. Use only new braided stainless steel hoses.
  4. Connect Drain Hose: Route the drain hose to the drain connection with a high loop to prevent backflow into the dishwasher.
  5. Electrical Connection: Connect to a properly grounded 120V, 60Hz, 15A dedicated circuit. Follow local electrical codes.
  6. Level the Dishwasher: Adjust the leveling legs to ensure the dishwasher is level from front to back and side to side.
  7. Secure to Countertop: Use mounting brackets to secure the dishwasher to the underside of the countertop.
  8. Test Run: Run the dishwasher through a complete cycle to check for leaks and proper operation.
Warning: All installations must be performed by a qualified installer to ensure proper operation and maintain warranty coverage.

Specifications

Model Number KDPM354GPS0
Type Built-in Dishwasher
Color PrintShield™ Stainless Steel
Capacity Place Settings: 14
Noise Level 44 dBA
Control Type Hidden Touch Controls with LED Display
Energy Rating ENERGY STAR® Certified
Water Consumption 2.9 gallons per cycle (Normal)
Power Requirements 120V, 60Hz, 15A
Dimensions (HxWxD) 33.75 x 23.56 x 24.56 inches
Weight 105 lbs
Drying System ProDry® System with Heated Dry

Warranty Information

  • Full Warranty: 1 year parts and labor
  • Limited Warranty: 5 years on racks and tub
  • Additional Coverage: Optional extended warranty available

For warranty service, contact KitchenAid Customer Service at 1-800-422-1230 or visit KitchenAid.com

Key Features

ProWash™ Cycle

Automatically senses soil levels and adjusts water temperature, amount, and cycle time for optimal cleaning performance on every load.

Third Level Rack

Additional top rack provides extra space for utensils, small items, and odd-shaped pieces, increasing loading flexibility and capacity.

PrintShield™ Finish

Stainless steel exterior resists fingerprints and smudges, maintaining a clean appearance with minimal maintenance required.

FreeFlex™ Third Rack

Adjustable third rack with fold-down tines and movable rows accommodates various item sizes and shapes for maximum loading versatility.

ProDry® System

Advanced drying system uses a fan and heating element to thoroughly dry all items, including plastics, without the need for rinse aids.

Hard Food Disposer

Built-in hard food disposer grinds up food particles, eliminating the need for pre-rinsing dishes before loading.

Wash Cycle Options

ProWash™

Automatically adjusts for optimal cleaning based on soil level detection

Heavy

Intensive cleaning for heavily soiled pots, pans, and bakeware

Normal

Standard cleaning for everyday dishes with normal soil levels

Light

Quick wash for lightly soiled items with shorter cycle time

Rinse Only

Rinses dishes without detergent to prevent drying of food soils

China/Crystal

Gentle wash with lower water temperature for delicate items

Troubleshooting

Problem Possible Cause Solution
Dishwasher won't start Power issue, door not closed properly Check power supply, ensure door is latched completely
Poor cleaning results Overloading, wrong detergent, incorrect loading Reduce load size, use correct detergent, ensure proper loading
Water not draining Drain hose clogged or kinked Check drain hose for obstructions or kinks, clean filter
Leaking water Door not sealed, overfilling, loose connections Check door seal, ensure proper detergent amount, check connections
Unusual noises Foreign objects in spray arms, unbalanced load Check for foreign objects, redistribute load evenly
Dishes not drying Heating element failure, rinse aid empty Check heating element, refill rinse aid dispenser

Error Codes

  • F1: Water supply issue - Check water supply and inlet valve
  • F2: Drain issue - Check drain hose and pump
  • F3: Temperature sensor issue - Contact service center
  • F4: Heater issue - Contact service center
  • F5: Motor issue - Contact service center
  • F7: Water leak detected - Check for leaks and water supply

Manual Downloads

Current Model Manuals

KDPM354GPS0

Built-in Dishwasher with ProWash™

KDPE234GPS0

Built-in Dishwasher with Third Rack

KDTM354ESS0

Built-in Dishwasher with PrintShield™

KDFE104DSS0

Built-in Dishwasher with FreeFlex™

Popular Previous Models

KUDK03CTSS0

Built-in Dishwasher with ProScrub™

KUDE48FXSS0

Built-in Dishwasher with CrystalDry™

KDTE104DSS0

Built-in Dishwasher with Third Rack

KDFE204DSS0

Built-in Dishwasher with FreeFlex™

Note: For models not listed here, please visit the KitchenAid Support Website for complete documentation.