KitchenAid Dishwasher KDTE204KPS

User Manual & Installation Guide

Built-In Dishwasher

Installation Guide

Tools Needed:

  • Adjustable wrench
  • Level
  • Screwdrivers (flat and Phillips)
  • Pliers
  • Tape measure
  • Pipe cutter

Step-by-Step Installation

  1. Prepare Installation Area: Ensure cabinet opening is clean and level. Verify electrical and plumbing connections are accessible.
  2. Remove Shipping Materials: Remove all protective films, tapes, and shipping bolts from the dishwasher.
  3. Connect Water Supply: Connect hot water supply line to the water inlet valve. Use only new braided stainless steel hose.
  4. Connect Drain Hose: Route the drain hose to the sink drain or garbage disposal with a high loop to prevent backflow.
  5. Electrical Connection: Connect to a properly grounded 120V, 60Hz, dedicated circuit. Follow local electrical codes.
  6. Level the Dishwasher: Adjust the leveling legs to ensure the dishwasher is level from front to back and side to side.
  7. Secure to Countertop: Use mounting brackets to secure the dishwasher to the underside of the countertop.
  8. Test Run: Run the dishwasher through a complete cycle to check for leaks and proper operation.
Warning: All installations must be performed by a qualified installer to ensure proper operation and maintain warranty coverage.

Specifications

Model Number KDTE204KPS
Type Built-In Dishwasher
Color PrintShield™ Stainless Steel
Place Settings 14 Place Settings
Noise Level 44 dBA
Control Type Hidden Touch Controls with LED Display
Energy Rating ENERGY STAR® Certified
Water Consumption 2.9 gallons per cycle (Normal)
Power Requirements 120V, 60Hz, 15A
Dimensions (HxWxD) 33.75 x 23.56 x 24.56 inches
Weight 105 lbs
Wash Cycles 6 Wash Cycles + 5 Options

Warranty Information

  • Full Warranty: 1 year parts and labor
  • Extended Warranty: 5 years on stainless steel tub and door liner
  • Additional Coverage: Optional extended warranty available

For warranty service, contact KitchenAid Customer Service at 1-800-422-1230 or visit KitchenAid.com

Key Features

ProWash™ Cycle

Automatically adjusts water temperature, wash time, and spray arm motion to clean dishes thoroughly while saving energy and water.

PrintShield™ Finish

Stainless steel exterior resists fingerprints and smudges, maintaining a clean appearance with minimal maintenance.

Third Level Rack

Additional top rack provides extra space for utensils, small plates, and cooking tools, increasing loading flexibility.

Hard Food Disposer

Built-in food disposer grinds up food particles, eliminating the need for pre-rinsing dishes before loading.

Clean Water Wash System

Filtration system with hard food disposer and fine screen filter ensures water is recirculated clean throughout the cycle.

Quiet Operation

Sound insulation and advanced motor technology provide quiet operation at just 44 dBA.

Wash Cycles Explained

ProWash

Automatic cycle that senses soil level and adjusts accordingly for optimal cleaning

Heavy

Intensive cleaning for pots, pans, and heavily soiled dishes

Normal

Standard wash cycle for everyday dishes with normal soil

Light

Quick wash for lightly soiled dishes and glassware

Rinse Only

Rinses dishes without detergent to prevent drying of food particles

China/Crystal

Gentle cycle for delicate china, crystal, and fine glassware

Troubleshooting

Problem Possible Cause Solution
Dishwasher won't start Power issue, door not closed properly, child lock engaged Check power supply, ensure door is latched completely, check child lock
Poor cleaning results Overloading, wrong detergent, clogged spray arms Rearrange load properly, use correct detergent, clean spray arms
Water not draining Drain hose clogged or kinked, drain filter blocked Check drain hose for obstructions, clean drain filter
Leaking water Door not sealed, overfilling, loose connections Check door seal, ensure proper detergent amount, check connections
Unusual noises Foreign objects in tub, spray arm obstruction Check for foreign objects, ensure spray arms rotate freely
Dishes not drying Heated dry option off, rinse aid empty, overloading Enable heated dry, refill rinse aid, reduce load size

Error Codes

  • F1/E1: Water supply issue - Check water supply and inlet valve
  • F2/E2: Drain issue - Check drain hose and pump
  • F3/E3: Temperature sensor issue - Contact service center
  • F4/E4: Overflow detected - Check for leaks and water level
  • F5/E5: Heater issue - Contact service center
  • F7/E7: Motor control issue - Contact service center

Manual Downloads

Current Model Manuals

KDTE204KPS

Built-In Dishwasher with ProWash

KDTE204KBS

Built-In Dishwasher Black Stainless

KDTE204KWS

Built-In Dishwasher White

KDTM354KPS

Top Control Dishwasher

Popular Previous Models

KDTE104KPS

Built-In Dishwasher

KUDE48FXSP

Elevating Third Rack

KDFE454KPS

Front Control Dishwasher

KDTE334GPS

Built-In Dishwasher

Note: For models not listed here, please visit the KitchenAid Support Website for complete documentation.