KitchenAid Dishwasher KDTE234GPS

User Manual & Installation Guide

Built-In Dishwasher

Installation Guide

Tools Needed:

  • Adjustable wrench
  • Level
  • Screwdrivers (flat and Phillips)
  • Pipe wrench
  • Tape measure
  • Drill with bits

Step-by-Step Installation

  1. Prepare Installation Area: Ensure cabinet opening meets required dimensions and is level, clean, and dry.
  2. Remove Shipping Materials: Remove all protective films, shipping brackets, and packaging materials from the dishwasher.
  3. Connect Water Supply: Connect hot water supply line to the water inlet valve using approved dishwasher connector.
  4. Connect Drain Hose: Route drain hose to drain connection with high loop or air gap to prevent backflow.
  5. Electrical Connection: Connect to dedicated 120V, 60Hz, 15-amp circuit. Follow local electrical codes.
  6. Position and Secure: Slide dishwasher into opening, level the unit, and secure to countertop and/or cabinets.
  7. Test Run: Run dishwasher through a complete cycle to check for leaks and proper operation.
Warning: All installations must be performed by a qualified installer to ensure proper operation and maintain warranty coverage.

Specifications

Model Number KDTE234GPS
Type Built-In Dishwasher
Color/Finish PrintShield™ Stainless Steel
Place Settings 14 Place Settings
Noise Level 44 dBA
Control Type Hidden Touch Controls with LED Display
Energy Rating ENERGY STAR® Certified
Water Consumption 2.9 gallons per cycle (Normal Wash)
Power Requirements 120V, 60Hz, 15A
Dimensions (HxWxD) 33.75 x 23.56 x 24.56 inches
Weight 95 lbs
Wash Cycles 5 Wash Cycles + 5 Options

Warranty Information

  • Full Warranty: 1 year parts and labor
  • Stainless Steel Tub Warranty: Limited lifetime
  • Rack Warranty: 10 years
  • Additional Coverage: Optional extended warranty available

For warranty service, contact KitchenAid Customer Service at 1-800-422-1230 or visit KitchenAid.com

Key Features

ProWash™ Cycle

Automatically adjusts water temperature, wash time, and spray arm motion to clean dishes based on soil level for optimal cleaning performance.

Third Level Rack

Extra upper rack provides additional space for utensils, small plates, and cooking tools, maximizing loading capacity and flexibility.

FreeFlex™ Third Rack

Adjustable third rack with fold-down tines allows for custom loading configurations to accommodate various item sizes and shapes.

StemWare Holders

Specialized stemware holders in the upper rack securely hold wine glasses and delicate stemware during the wash cycle.

Hard Food Disposer

Built-in hard food disposer grinds up food particles, eliminating the need for pre-rinsing dishes before loading.

Advanced Clean Water Wash System

Multi-filtration system with hard food disposer and fine mesh filter ensures optimal water circulation and cleaning performance.

Wash Cycles Explained

ProWash™

Automatically adjusts cycle based on soil level for everyday cleaning

Heavy

Intensive cleaning for pots, pans, and heavily soiled dishes

Normal

Standard wash cycle for everyday dishwashing needs

Light

Quick wash for lightly soiled dishes and glassware

Rinse Only

Rinses dishes without detergent to prevent drying of food particles

China/Crystal

Gentle cycle for delicate china, crystal, and fine glassware

Troubleshooting

Problem Possible Cause Solution
Dishwasher won't start Power issue, door not latched properly, child lock engaged Check power supply, ensure door is latched completely, check child lock setting
Poor cleaning results Overloading, wrong detergent, incorrect loading, clogged filter Reduce load size, use correct detergent, proper loading technique, clean filter
Water not draining Drain hose clogged or kinked, drain pump obstructed Check drain hose for obstructions or kinks, clean drain pump area
Leaking water Door not sealed, overfilling, loose connections, worn gasket Check door seal, ensure proper detergent amount, check connections, inspect gasket
Unusual noises Spray arm obstruction, foreign objects in pump, loose parts Check spray arms for obstructions, inspect pump area, tighten loose components
Dishes not drying Rinse aid empty, high humidity, plastic items, heating element issue Refill rinse aid, use heated dry option, check heating element

Error Codes

  • F1/E1: Water fill issue - Check water supply and inlet valve
  • F2/E2: Drain issue - Check drain hose and pump
  • F3/E3: Temperature issue - Check heating element and thermostat
  • F4/E4: Overflow detected - Check for leaks and water level
  • F5/E5: Motor control issue - Contact service center
  • F7/E7: Heater relay issue - Contact service center

Manual Downloads

Current Model Manuals

KDTE234GPS

Built-In Dishwasher with ProWash™

KDTE204KPS

Built-In Dishwasher with Third Rack

KDTM354ESS

Top Control Built-In Dishwasher

KDPE234GPS

Built-In Dishwasher with FreeFlex™

Popular Previous Models

KUDC03FKSS

Built-In Dishwasher with Clean Water

KDFE454DSS

Built-In Dishwasher with StemWare

KDTE104DBL

Built-In Dishwasher Black

KUDE48FXSS

Built-In Dishwasher Stainless

Note: For models not listed here, please visit the KitchenAid Support Website for complete documentation.