KitchenAid Dishwasher KDTE334GPS

User Manual & Installation Guide

Built-In Dishwasher

Installation Guide

Tools Needed:

  • Adjustable wrench
  • Level
  • Screwdrivers (flat and Phillips)
  • Pipe wrench
  • Tape measure
  • Drill with hole saw attachment

Step-by-Step Installation

  1. Prepare Installation Area: Ensure cabinet opening meets required dimensions and has proper electrical and plumbing connections.
  2. Remove Shipping Materials: Remove all protective films, tapes, and shipping brackets from the dishwasher.
  3. Connect Water Supply: Connect hot water supply line to the water inlet valve using approved dishwasher connector.
  4. Connect Drain Hose: Route the drain hose to drain connection with high loop to prevent backflow into dishwasher.
  5. Electrical Connection: Connect to dedicated 120V, 60Hz, 15-amp circuit. Follow local electrical codes.
  6. Position and Level: Slide dishwasher into opening and adjust leveling legs to ensure proper alignment with countertop.
  7. Secure to Countertop: Attach mounting brackets to underside of countertop to secure dishwasher in place.
  8. Test Run: Run the dishwasher through a complete cycle to check for leaks and proper operation.
Warning: All installations must be performed by a qualified installer to ensure proper operation and maintain warranty coverage.

Specifications

Model Number KDTE334GPS
Type Built-In Dishwasher
Color PrintShield™ Stainless Steel
Place Settings 14 Place Settings
Noise Level 44 dBA
Control Type Hidden Touch Controls with LED Display
Energy Rating ENERGY STAR® Certified
Water Consumption 2.9 gallons per cycle
Power Requirements 120V, 60Hz, 15A
Dimensions (HxWxD) 33.75 x 23.56 x 24.25 inches
Weight 105 lbs
Wash Cycles 6 Wash Cycles + 5 Options

Warranty Information

  • Full Warranty: 1 year parts and labor
  • Stainless Steel Tub Warranty: Limited lifetime warranty
  • Additional Coverage: Optional extended warranty available

For warranty service, contact KitchenAid Customer Service at 1-800-422-1230 or visit KitchenAid.com

Key Features

ProWash™ Cycle

Automatically adjusts water temperature, wash time, and spray arm motion to clean dishes thoroughly while saving energy and water.

Third Level Rack

Additional top rack provides extra space for utensils, spatulas, and other small items, maximizing loading capacity and flexibility.

PrintShield™ Finish

Advanced stainless steel finish resists fingerprints and smudges, keeping your dishwasher looking clean and new with minimal maintenance.

Hard Food Disposer

Built-in food disposer grinds up food particles during the wash cycle, eliminating the need for pre-rinsing dishes.

Advanced Clean Water Wash System

Multiple filtration stages and powerful spray arms ensure thorough cleaning while filtering out food particles for spot-free results.

Quiet Operation

Advanced sound insulation and quiet motor operation provide whisper-quiet performance at only 44 dBA.

Wash Cycles Explained

ProWash™

Intelligent cycle that senses soil level and adjusts automatically for optimal cleaning

Heavy

Intensive cleaning for pots, pans, and heavily soiled dishes

Normal

Standard wash cycle for everyday dishwashing needs

Light

Quick wash for lightly soiled dishes and glassware

Rinse Only

Rinses dishes without detergent to prevent drying of food particles

China/Crystal

Gentle cycle for delicate china, crystal, and fine glassware

Troubleshooting

Problem Possible Cause Solution
Dishwasher won't start Power issue, door not closed properly, control lock activated Check power supply, ensure door is latched completely, check control lock setting
Poor cleaning results Overloading, wrong detergent, clogged spray arms Rearrange load properly, use recommended detergent, clean spray arms
Water not draining Drain hose clogged or kinked, filter blocked Check drain hose for obstructions, clean filter assembly
Leaking water Door not sealed, overfilling, loose connections Check door seal, ensure proper detergent amount, check connections
Unusual noises Foreign objects in pump, spray arm hitting dishes Check for foreign objects, rearrange load to prevent interference
Dishes not drying Rinse aid empty, heating element issue Refill rinse aid dispenser, check heating element operation

Error Codes

  • F1/E1: Water supply issue - Check water supply and inlet valve
  • F2/E2: Drain issue - Check drain hose and pump
  • F3/E3: Temperature sensor issue - Contact service center
  • F4/E4: Overflow detected - Check for leaks and water level
  • F5/E5: Heating element issue - Contact service center
  • F6/E6: Motor control issue - Contact service center

Manual Downloads

Current Model Manuals

KDTE334GPS

Built-In Dishwasher with ProWash™

KDTE334GSS

Stainless Steel Built-In Dishwasher

KDTE334GWH

White Built-In Dishwasher

KDTM354KPS

Top Control Built-In Dishwasher

Popular Previous Models

KDTE204KPS

Built-In Dishwasher

KUDK03CTSS

Stainless Steel Dishwasher

KUDE48FXSS

Elevated Handle Dishwasher

KDFE454HPS

Front Control Dishwasher

Note: For models not listed here, please visit the KitchenAid Support Website for complete documentation.