KitchenAid Dishwasher KDTM404KPS

User Manual & Installation Guide

Built-In Dishwasher

Installation Guide

Tools Needed:

  • Adjustable wrench
  • Level
  • Screwdrivers (flat and Phillips)
  • Pipe wrench
  • Tape measure
  • Drill with bits

Step-by-Step Installation

  1. Prepare Installation Area: Ensure cabinet opening is clean and level. Standard opening should be 24" wide, 34-1/2" high, and 24" deep.
  2. Remove Shipping Materials: Remove all protective packaging, tape, and shipping bolts from the dishwasher.
  3. Connect Water Supply: Connect hot water supply line to the water inlet valve. Use only new braided stainless steel supply lines.
  4. Connect Drain Hose: Route drain hose to drain connection with high loop to prevent backflow into dishwasher.
  5. Electrical Connection: Connect to dedicated 120V, 60Hz, 15-amp circuit. Hardwire according to local electrical codes.
  6. Level the Dishwasher: Adjust leveling legs to ensure dishwasher is level from front to back and side to side.
  7. Secure to Countertop: Use mounting brackets to secure dishwasher to underside of countertop.
  8. Test Run: Run dishwasher through a complete cycle to check for leaks and proper operation.
Warning: All installations must be performed by a qualified installer to ensure proper operation and maintain warranty coverage.

Specifications

Model Number KDTM404KPS
Type Built-In Dishwasher
Color PrintShield™ Stainless Steel
Place Settings 14 Place Settings
Noise Level 44 dBA
Control Type Hidden Touch Controls with LED Display
Energy Rating ENERGY STAR® Certified
Water Consumption 2.9 gallons per cycle (Normal Wash)
Power Requirements 120V, 60Hz, 15A
Dimensions (HxWxD) 33-7/8" x 23-7/8" x 24-1/2"
Weight 95 lbs
Wash System ProWash™ Cycle with 40+ gallon per minute wash

Warranty Information

  • Full Warranty: 1 year parts and labor
  • Stainless Steel Tub Warranty: Limited lifetime warranty
  • Racks Warranty: 10 years on stainless steel racks
  • Additional Coverage: Optional extended warranty available

For warranty service, contact KitchenAid Customer Service at 1-800-422-1230 or visit KitchenAid.com

Key Features

ProWash™ Cycle

Advanced sensor technology automatically adjusts water temperature, amount, and cycle time to clean dishes thoroughly the first time, every time.

PrintShield™ Finish

Stainless steel exterior resists fingerprints and smudges, maintaining the beautiful appearance of your dishwasher with minimal cleaning.

Third Rack

Extra capacity with the specialized third rack designed for utensils, small tools, and kitchen gadgets, freeing up space in the lower racks.

FreeFlex™ Tines

Adjustable and fold-down tines provide flexible loading options to accommodate large pots, pans, and oddly shaped items with ease.

Advanced Clean Water Wash System

Multi-filtration system with hard food disposer and 40+ gallon per minute wash ensures thorough cleaning and eliminates pre-rinsing.

Quiet Operation

Advanced sound insulation and precision engineering deliver quiet 44 dBA operation, allowing for use anytime without disruption.

Wash Cycles Explained

ProWash

Automatically adjusts for optimal cleaning of everyday loads

Heavy

Intensive cleaning for pots, pans, and baked-on foods

Normal

Standard wash for everyday dishes with normal soil levels

Light

Quick wash for lightly soiled dishes and glassware

Rinse Only

Rinses dishes to prevent drying of food particles

Sanitize

High-temperature wash that eliminates 99.9% of bacteria

Troubleshooting

Problem Possible Cause Solution
Dishwasher won't start Power issue, door not closed properly, child lock engaged Check power supply, ensure door is latched completely, check control lock
Poor cleaning results Overloading, wrong detergent, clogged spray arms Rearrange load, use recommended detergent, clean spray arms
Water not draining Drain hose clogged, air gap blocked, filter needs cleaning Check drain hose and air gap, clean filter assembly
Leaking water Door not sealed, overfilling, loose connections Check door seal and gasket, ensure proper loading, check connections
Unusual noises Foreign objects in pump, spray arm obstruction Check for foreign objects, ensure spray arms rotate freely
Dishes not drying Rinse aid empty, high humidity drying option off Refill rinse aid, ensure heated drying is selected

Error Codes

  • F1: Water supply issue - Check water supply and inlet valve
  • F2: Drain issue - Check drain hose and pump
  • F3: Temperature sensor issue - Contact service center
  • F4: Heater issue - Contact service center
  • F5: Motor control issue - Contact service center
  • F6: Overflow detected - Check for leaks and water level

Manual Downloads

Current Model Manuals

KDTM404KPS

Built-In Dishwasher with ProWash

KDTM354KPS

Built-In Dishwasher with Third Rack

KDTE334GPS

Built-In Dishwasher with PrintShield

KDTM404KBS

Built-In Dishwasher Black Stainless

Popular Previous Models

KDTE204KPS

Built-In Dishwasher with FreeFlex

KDFE454KPS

Built-In Dishwasher with Advanced Clean

KUDE48FXPS

Built-In Dishwasher with CrystalDry

KDTM354ESS

Built-In Dishwasher with Stainless Tub

Note: For models not listed here, please visit the KitchenAid Support Website for complete documentation.