KitchenAid Dishwasher KDTM404KPS

User Manual & Installation Guide

Built-In Dishwasher

Installation Guide

Tools Needed:

  • Adjustable wrench
  • Level
  • Screwdrivers (flat and Phillips)
  • Pliers
  • Tape measure
  • Drill with bits

Step-by-Step Installation

  1. Prepare Installation Space: Ensure cabinet opening meets required dimensions and has proper electrical and plumbing connections.
  2. Remove Shipping Materials: Remove all protective packaging, tape, and shipping bolts from the dishwasher.
  3. Connect Water Supply: Connect hot water supply line to the water inlet valve. Use only new braided stainless steel hose.
  4. Connect Drain Hose: Route the drain hose to the drain connection with a high loop to prevent backflow into the dishwasher.
  5. Electrical Connection: Connect to a properly grounded 120V, 60Hz, dedicated circuit. Follow local electrical codes.
  6. Level the Dishwasher: Adjust the leveling legs to ensure the dishwasher is level and properly aligned with cabinetry.
  7. Secure to Countertop: Use mounting brackets to secure the dishwasher to the underside of the countertop.
  8. Test Run: Run the dishwasher through a complete cycle to check for leaks and proper operation.
Warning: All installations must be performed by a qualified installer to ensure proper operation and maintain warranty coverage.

Specifications

Model Number KDTM404KPS
Type Built-In Dishwasher
Color PrintShield™ Stainless Steel
Place Settings 14 Place Settings
Noise Level 44 dBA
Control Type Hidden Touch Controls with LED Display
Energy Rating ENERGY STAR® Certified
Water Consumption 2.9 gallons per cycle (Normal Wash)
Power Requirements 120V, 60Hz, 15A
Dimensions (HxWxD) 33.75 x 23.56 x 22.56 inches
Weight 105 lbs
Wash Cycles 6 Wash Cycles + 5 Options

Warranty Information

  • Full Warranty: 1 year parts and labor
  • Stainless Steel Tub Warranty: Limited lifetime warranty
  • Racks Warranty: 10 years on racks and tub
  • Additional Coverage: Optional extended warranty available

For warranty service, contact KitchenAid Customer Service at 1-800-422-1230 or visit KitchenAid.com

Key Features

ProWash™ Cycle

Automatically adjusts water temperature, wash time, and spray motions to clean dishes thoroughly the first time, every time.

FreeFlex™ Third Rack

Adjustable third rack with fold-down tines provides extra space for utensils and small items, maximizing loading flexibility.

PrintShield™ Finish

Stainless steel exterior resists fingerprints and smudges, maintaining a clean appearance with minimal maintenance.

Hard Food Disposer

Built-in hard food disposer eliminates the need for pre-rinsing by grinding up food particles during the wash cycle.

Advanced Clean Water Wash System

Multi-filtration system with hard food disposer and fine mesh filter ensures optimal cleaning performance cycle after cycle.

Quiet Operation

Sound insulation and advanced engineering provide quiet operation at just 44 dBA, quieter than normal conversation.

Wash Cycles Explained

ProWash

Automatically senses and adjusts for optimal cleaning of mixed loads

Heavy

Intensive cleaning for pots, pans, and heavily soiled dishes

Normal

Standard wash for everyday dishes with normal soil levels

Light

Quick wash for lightly soiled dishes and glassware

Rinse Only

Rinses dishes without detergent to prevent drying of food particles

China/Crystal

Gentle wash with lower water temperature for delicate items

Troubleshooting

Problem Possible Cause Solution
Dishwasher won't start Power issue, door not closed properly Check power supply, ensure door is latched completely
Poor cleaning results Overloading, wrong detergent, incorrect loading Reduce load size, use correct detergent, follow loading guidelines
Water not draining Drain hose clogged or kinked Check drain hose for obstructions or kinks, clean filter
Leaking water Door not sealed, overfilling, loose connections Check door seal, ensure proper detergent amount, check connections
Unusual noises Foreign objects in spray arms, improper loading Check for foreign objects, reload dishes properly
Dishes not drying Rinse aid empty, high humidity, plastic items Refill rinse aid, use heated dry option, separate plastic items

Error Codes

  • F1E1: Water supply issue - Check water supply and inlet valve
  • F2E1: Drain issue - Check drain hose and pump
  • F3E1: Heating issue - Check heating element and thermostat
  • F4E1: Temperature sensor issue - Contact service center
  • F5E1: Door switch issue - Ensure door is fully closed
  • F7E1: Motor control issue - Contact service center

Manual Downloads

Current Model Manuals

KDTM404KPS

Built-In Dishwasher with ProWash

KDTM354KPS

Built-In Dishwasher with Third Rack

KDTE334GPS

Built-In Dishwasher with PrintShield

KDTM404KBS

Built-In Dishwasher Black Stainless

Popular Previous Models

KDTE254DSS

Built-In Dishwasher with Hard Food Disposer

KUDK03CTSS

Built-In Dishwasher with FreeFlex Rack

KUDE48FXSS

Built-In Dishwasher with CrystalDry

KDFE454DSS

Built-In Dishwasher with Advanced Clean

Note: For models not listed here, please visit the KitchenAid Support Website for complete documentation.