KitchenAid Dishwasher KDTM404KPS

Owner's Manual & Installation Guide

Built-In Dishwasher

Installation Guide

Tools Needed:

  • Adjustable wrench
  • Level
  • Screwdrivers (flat and Phillips)
  • Pipe wrench
  • Tape measure
  • Drill with bits

Step-by-Step Installation

  1. Prepare Installation Area: Ensure cabinet opening meets required dimensions and is level, clean, and dry.
  2. Remove Shipping Materials: Remove all protective films, tapes, and shipping braces from the dishwasher interior.
  3. Connect Water Supply: Connect hot water supply line to the water inlet valve using a new braided stainless steel hose.
  4. Connect Drain Hose: Route drain hose through cabinet opening and connect to drain system with high loop to prevent backflow.
  5. Electrical Connection: Connect to a properly grounded 120V, 60Hz, 15A dedicated circuit. Follow local electrical codes.
  6. Position and Level: Slide dishwasher into opening and adjust leveling legs to ensure proper alignment with countertop.
  7. Secure to Countertop: Attach mounting brackets to underside of countertop using provided screws.
  8. Test Run: Run dishwasher through a complete cycle to check for leaks and proper operation.
Warning: Installation must be performed by a qualified technician to ensure proper operation and maintain warranty coverage.

Specifications

Model Number KDTM404KPS
Type Built-In Dishwasher
Color PrintShield™ Stainless Steel
Place Settings 14 Place Settings
Noise Level 44 dBA
Control Type Hidden Touch Controls with LED Display
Energy Rating ENERGY STAR® Certified
Water Consumption 2.9 gallons per cycle (Normal Wash)
Power Requirements 120V, 60Hz, 15A
Dimensions (HxWxD) 33.75 x 23.56 x 22.56 inches
Weight 105 lbs
Wash Cycles 6 Wash Cycles + 5 Options

Warranty Information

  • Full Warranty: 1 year parts and labor
  • Extended Warranty: 5 years on stainless steel tub and door liner
  • Additional Coverage: Optional extended warranty available

For warranty service, contact KitchenAid Customer Service at 1-800-422-1230 or visit KitchenAid.com

Key Features

ProWash™ Cycle

Automatically adjusts water temperature, wash time, and spray arm motion to clean dishes thoroughly while saving energy and water.

Third Level Rack

Additional top rack provides extra space for utensils, spatulas, and small items, maximizing loading capacity and flexibility.

FreeFlex™ Third Rack

Adjustable third rack with fold-down tines allows for customized loading of various sized utensils and kitchen tools.

Hard Food Disposer

Built-in hard food disposer grinds up food particles, eliminating the need for pre-rinsing dishes before loading.

PrintShield™ Finish

Stainless steel exterior resists fingerprints and smudges, maintaining a clean appearance with minimal maintenance.

Advanced Clean Water Wash System

Multi-filtration system with hard food disposer and fine mesh filter ensures optimal cleaning performance cycle after cycle.

Wash Cycles Explained

ProWash

Automatic cycle that senses soil level and adjusts for optimal cleaning

Heavy

Intensive cleaning for heavily soiled pots, pans, and bakeware

Normal

Standard wash for everyday dishes with normal soil levels

Light

Quick wash for lightly soiled dishes and glassware

Rinse Only

Rinses dishes without detergent to prevent drying of food particles

China/Crystal

Gentle wash with lower water temperature for delicate items

Troubleshooting

Problem Possible Cause Solution
Dishwasher won't start Power issue, door not latched properly Check circuit breaker, ensure door is fully closed and latched
Poor cleaning results Overloading, wrong detergent, spray arms blocked Rearrange load, use recommended detergent, check spray arm rotation
Water not draining Drain hose clogged or kinked, filter blocked Check drain hose, clean filter and disposer
Leaking water Door not sealed, overfilling, loose connections Check door seal, ensure proper detergent amount, check connections
Unusual noises Spray arms hitting dishes, hard objects in pump Rearrange load, check for foreign objects in pump area
Dishes not drying Rinse aid empty, high humidity drying option selected Refill rinse aid, select heated dry option

Error Codes

  • F1: Water fill issue - Check water supply and inlet valve
  • F2: Drain issue - Check drain hose and pump
  • F3: Temperature sensor issue - Contact service center
  • F4: Heater issue - Contact service center
  • F5: Door switch issue - Ensure door is fully closed
  • F7: Motor control issue - Contact service center

Manual Downloads

Current Model Manuals

KDTM404KPS

Built-In Dishwasher with ProWash

KDTM354KPS

Built-In Dishwasher with Third Rack

KDTE334GPS

Built-In Dishwasher with FreeFlex Rack

KDTM404KBS

Built-In Dishwasher Black Stainless

Popular Previous Models

KDTE204KPS

Built-In Dishwasher with Hard Food Disposer

KUDK03CTSS

Built-In Dishwasher with Third Level Rack

KUDE507EPS

Built-In Dishwasher with PrintShield Finish

KUDL23ECSS

Built-In Dishwasher with Advanced Clean Water

Note: For models not listed here, please visit the KitchenAid Support Website for complete documentation.