Installation Guide
Tools Needed:
- Adjustable wrench
- Level
- Screwdrivers (flat and Phillips)
- Pliers
- Tape measure
- Pipe cutter
Step-by-Step Installation
- Prepare Installation Area: Ensure cabinet opening meets required dimensions and has proper electrical and plumbing connections.
- Remove Shipping Materials: Remove all protective films, tapes, and shipping braces from the dishwasher interior.
- Connect Water Supply: Connect hot water supply line to the water inlet valve using approved water supply line.
- Connect Drain Hose: Route drain hose through cabinet opening and connect to drain system with high loop installation.
- Electrical Connection: Connect to a properly grounded 120V, 60Hz, 15A dedicated circuit. Follow local electrical codes.
- Position and Level: Slide dishwasher into cabinet opening and adjust leveling legs to ensure proper alignment.
- Secure Unit: Secure dishwasher to countertop or adjacent cabinets using mounting brackets provided.
- Test Run: Run dishwasher through a complete cycle to check for leaks and proper operation.
Specifications
| Model Number | KDTM704KPS |
| Type | Built-In Dishwasher |
| Color/Finish | PrintShield™ Stainless Steel |
| Place Settings | 14 Place Settings |
| Noise Level | 44 dBA |
| Control Type | Hidden Touch Controls with ProWash™ Cycle |
| Energy Rating | ENERGY STAR® Certified |
| Water Consumption | 2.9 gallons per cycle (Normal) |
| Power Requirements | 120V, 60Hz, 15A |
| Dimensions (HxWxD) | 33.75 x 23.56 x 22.56 inches |
| Third Rack | FreeFlex™ Third Rack |
| Drying System | ProDry™ System with Heated Dry |
Warranty Information
- Full Warranty: 1 year parts and labor
- Stainless Steel Tub: Limited lifetime warranty
- Racks: 10 years on racks and tub
- Additional Coverage: Optional extended warranty available
For warranty service, contact KitchenAid Customer Service at 1-800-422-1230 or visit KitchenAid.com
Key Features
ProWash™ Cycle
Advanced sensor technology automatically adjusts water temperature, amount, and cycle time to clean dishes thoroughly while saving energy and water.
FreeFlex™ Third Rack
Adjustable third rack provides flexible loading options for utensils, small plates, and kitchen tools, maximizing usable space and organization.
ProDry™ System
Advanced drying system uses a fan and heating element to efficiently dry all contents, including plastics, without the need for rinse aids.
PrintShield™ Finish
Stainless steel finish resists fingerprints and smudges, maintaining the clean appearance of your dishwasher with minimal maintenance.
Quiet Operation
Advanced sound insulation and motor technology provide quiet operation at just 44 dBA, allowing for use during family time or overnight.
Hard Food Disposer
Built-in hard food disposer eliminates the need for pre-rinsing by grinding up food particles during the wash cycle.
Wash Cycle Options
ProWash
Automatic cycle that senses soil level and adjusts accordingly for optimal cleaning
Heavy
Intensive cleaning for heavily soiled pots, pans, and bakeware
Normal
Standard cycle for everyday dishes with normal soil levels
Light
Quick cycle for lightly soiled dishes with shorter run time
Rinse Only
Rinses dishes without detergent to prevent drying of food particles
Crystal/Glass
Gentle cycle for delicate glassware and crystal with lower water temperature
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Dishwasher won't start | Power issue, door not latched properly, control lock activated | Check power supply, ensure door is latched completely, check control lock setting |
| Poor cleaning results | Overloading, wrong detergent, spray arms blocked | Rearrange load properly, use recommended detergent, check spray arm rotation |
| Water not draining | Drain hose clogged or kinked, filter blocked | Check drain hose for obstructions, clean filter assembly |
| Leaking water | Door not sealed, overfilling, loose connections | Check door seal, ensure proper detergent amount, check connections |
| Unusual noises | Spray arm hitting dishes, foreign objects in pump | Rearrange load properly, check for foreign objects in pump area |
| Dishes not drying | Heating element failure, rinse aid empty, wet load setting | Check heating element, refill rinse aid, use heated dry option |
Error Codes
- F1: Water fill issue - Check water supply and inlet valve
- F2: Drain issue - Check drain hose and pump
- F3: Temperature sensor issue - Contact service center
- F4: Heater issue - Contact service center
- F5: Door switch issue - Ensure door is fully closed
- F7: Motor control issue - Contact service center
Manual Downloads
Current Model Manuals
KDTM704KPS
Built-In Dishwasher with ProWash™
KDTM704KBS
Built-In Dishwasher Black Stainless
KDTE704KPS
Built-In Dishwasher with EasyRack™
KDTM404KPS
Built-In Dishwasher Standard Model
Popular Previous Models
KDTE354DSS
Built-In Dishwasher with Third Rack
KUDK03CTSS
Built-In Dishwasher Tall Tub
KDFE454DSS
Built-In Dishwasher Front Control
KDTM354ESS
Built-In Dishwasher Stainless