Installation Guide
Tools Needed:
- Adjustable wrench
- Screwdrivers (flat and Phillips)
- Level
- Pipe wrench
- Teflon tape
- Wire strippers
Step-by-Step Installation
- Choose Installation Location: Select a location near water supply, drain, and electrical connections with adequate clearance.
- Remove Packaging Materials: Remove all shipping materials, protective films, and transit bolts from the dishwasher.
- Connect Water Supply: Connect hot water supply line to the water inlet valve using approved connectors and Teflon tape.
- Connect Drain Hose: Route the drain hose to the drain connection with a high loop to prevent backflow and siphoning.
- Electrical Connection: Connect to a properly grounded 120V, 15A dedicated circuit. Follow local electrical codes.
- Level the Dishwasher: Adjust the leveling legs to ensure the dishwasher is perfectly level for optimal performance.
- Test Run: Run the dishwasher through a complete cycle to check for leaks and proper operation.
Specifications
| Model Series | KDTE104ESS / KDTM354ESS |
| Type | Built-in Dishwasher |
| Color | Stainless Steel / Black / White |
| Place Settings | 14-16 place settings |
| Noise Level | 44-49 dBA |
| Control Type | Touch Controls with LED Display |
| Energy Rating | ENERGY STAR® Certified |
| Water Consumption | 2.9-3.2 gallons per cycle |
| Power Requirements | 120V, 60Hz, 15A |
| Dimensions (HxWxD) | 33.75 x 23.56 x 24.56 inches |
| Weight | 95-115 lbs |
| Wash Cycles | 5-7 cycles including Heavy, Normal, Light, Rinse |
Warranty Information
- Full Warranty: 1 year parts and labor
- Stainless Steel Tub: 10 years limited warranty
- Additional Coverage: Optional extended warranty available
For warranty service, contact KitchenAid Customer Service at 1-800-422-1230 or visit KitchenAid.com
Key Features
ProWash™ Cycle
Automatically adjusts water temperature, wash time, and spray arm motion to clean dishes thoroughly while saving energy and water.
Third Level Rack
Additional upper rack provides extra space for utensils, small plates, and cooking tools, maximizing loading capacity.
FreeFlex™ Tines
Adjustable and fold-down tines allow for flexible loading of various dish sizes and shapes, including large platters and pans.
Hard Food Disposer
Built-in food disposer grinds up food particles, eliminating the need for pre-rinsing dishes before loading.
Advanced Drying System
Heated drying with fan-assisted technology ensures dishes come out completely dry and ready to use or put away.
Quiet Operation
Sound insulation and advanced motor technology provide quiet operation as low as 44 dBA, perfect for open-concept kitchens.
Wash Cycle Options
Heavy Wash
Intensive cleaning for pots, pans, and heavily soiled dishes with extended wash time and higher temperature
Normal Wash
Standard cycle for everyday dishes with optimal balance of cleaning performance and energy efficiency
Light Wash
Quick cycle for lightly soiled dishes or glassware with reduced water and energy consumption
Rinse Only
Quick rinse cycle to prevent food from drying on dishes until a full load is ready for washing
Sanitize
High-temperature cycle that eliminates 99.9% of household bacteria for hygienically clean dishes
Delay Start
Program dishwasher to run during off-peak hours for energy savings and convenience
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Dishwasher won't start | Power issue, door not latched properly, child lock engaged | Check power supply, ensure door is latched completely, check child lock setting |
| Poor cleaning results | Overloading, wrong detergent, clogged spray arms, hard water | Properly load dishes, use recommended detergent, clean spray arms, use rinse aid |
| Water not draining | Drain hose clogged, air gap blocked, drain pump issue | Check drain hose for obstructions, clean air gap, check drain pump |
| Leaking water | Door not sealed, overfilling, loose connections, worn gasket | Check door seal, ensure proper detergent amount, check connections, replace gasket |
| Unusual noises | Foreign objects in pump, spray arm obstruction, worn motor | Check for foreign objects, clean spray arms, contact service if motor noise persists |
| Dishes not drying | Rinse aid empty, water temperature too low, overloading | Refill rinse aid, check water heater setting, ensure proper loading |
Error Codes
- F1/E1: Water supply issue - Check water supply and inlet valve
- F2/E2: Drain issue - Check drain hose and pump
- F3/E3: Temperature sensor issue - Contact service center
- F4/E4: Overflow detected - Check for leaks and water level
- F5/E5: Motor control issue - Contact service center
- F7/E7: Heater issue - Contact service center
- F9/E9: Control panel communication error - Reset dishwasher
Manual Downloads
Current Model Manuals
KDTE104ESS
Top Control Built-in Dishwasher
KDTM354ESS
Front Control Built-in Dishwasher
KDPE234GPS
Portable Dishwasher
KDFE104DSS
Drawer Dishwasher
Popular Previous Models
KUDK03CTSS
Built-in Dishwasher
KUDC10FXSS
Built-in Dishwasher
KUDE10FXSS
Built-in Dishwasher
KUDL03ECSS
Built-in Dishwasher