KitchenAid Dishwasher Model KDFE104DSS2

User Manual & Installation Guide

Built-In Dishwasher

Installation Guide

Tools Needed:

  • Adjustable wrench
  • Level
  • Screwdrivers (flat and Phillips)
  • Pliers
  • Tape measure
  • Pipe wrench

Step-by-Step Installation

  1. Prepare Installation Area: Ensure cabinet opening is properly sized and level. Remove any debris from the installation area.
  2. Remove Shipping Materials: Remove all shipping bolts, tape, and protective coverings from the dishwasher.
  3. Connect Water Supply: Connect hot water supply line to the water inlet valve. Use only new braided stainless steel supply lines.
  4. Connect Drain Hose: Route the drain hose to the drain connection with a high loop to prevent backflow and siphoning.
  5. Electrical Connection: Connect to a properly grounded 120V, 60Hz, 15A dedicated circuit. Follow local electrical codes.
  6. Position and Level: Slide dishwasher into opening and adjust leveling legs to ensure proper alignment with countertop.
  7. Secure to Countertop: Secure dishwasher to underside of countertop using mounting brackets provided.
  8. Test Run: Run the dishwasher through a complete cycle to check for leaks and proper operation.
Warning: All installations must be performed by a qualified installer to ensure proper operation and maintain warranty coverage.

Specifications

Model Number KDFE104DSS2
Type Built-In Dishwasher
Color/Finish Stainless Steel
Place Settings 14 Place Settings
Noise Level 44 dBA
Control Type Electronic Touch Controls with Display
Energy Rating ENERGY STAR® Certified
Water Consumption 2.9 gallons per cycle (Normal Wash)
Power Requirements 120V, 60Hz, 15A
Dimensions (HxWxD) 33.75 x 23.56 x 22.63 inches
Weight 105 lbs
Wash Cycles 6 Wash Cycles + 5 Options

Warranty Information

  • Full Warranty: 1 year parts and labor
  • Extended Warranty: 5 years on stainless steel tub and door liner
  • Additional Coverage: Optional extended warranty available

For warranty service, contact KitchenAid Customer Service at 1-800-422-1230 or visit KitchenAid.com

Key Features

ProWash™ Cycle

Automatically adjusts water temperature, wash time, and spray arm motion to deliver optimal cleaning results for each load.

Third Level Rack

Additional top rack provides extra space for utensils, small plates, and cooking tools, maximizing loading flexibility.

FreeFlex™ Tines

Adjustable and fold-down tines allow for customized loading to accommodate various dish sizes and shapes.

Hard Food Disposer

Built-in hard food disposer grinds up food particles, eliminating the need for pre-rinsing dishes.

Advanced Clean Water Wash System

Multi-filtration system with hard food disposer and fine mesh filter ensures optimal cleaning performance.

Quiet Operation

Sound insulation and advanced motor technology provide quiet operation at only 44 dBA.

Wash Cycles Explained

ProWash

Automated cycle that senses soil level and adjusts accordingly for optimal cleaning

Heavy

Intensive cleaning for pots, pans, and heavily soiled dishes

Normal

Standard wash cycle for everyday dishes with normal soil

Light

Quick wash for lightly soiled dishes and glassware

Rinse Only

Rinses dishes without detergent to prevent drying of food particles

China/Crystal

Gentle cycle for delicate china, crystal, and fine glassware

Troubleshooting

Problem Possible Cause Solution
Dishwasher won't start Power issue, door not latched properly Check power supply, ensure door is closed and latched completely
Poor cleaning results Overloading, wrong detergent, spray arms blocked Reduce load size, use correct detergent, check spray arms for obstructions
Water not draining Drain hose clogged or kinked, filter blocked Check drain hose for obstructions, clean filter assembly
Leaking water Door not sealed, overfilling, loose connections Check door seal, ensure proper detergent amount, check connections
Unusual noises Foreign objects in pump, spray arms hitting dishes Check for foreign objects, rearrange load properly
Dishes not drying Rinse aid empty, high humidity drying option off Refill rinse aid, ensure heated drying option is selected

Error Codes

  • F1: Water supply issue - Check water supply and inlet valve
  • F2: Drain issue - Check drain hose and pump
  • F3: Temperature sensor issue - Contact service center
  • F4: Heater issue - Contact service center
  • F5: Motor control issue - Contact service center
  • F9: Control panel communication error - Reset power

Manual Downloads

Current Model Manuals

KDFE104DSS2

Built-In Dishwasher with ProWash

KDFE204DSS2

Built-In Dishwasher with Third Rack

KDTE204DSS2

Top Control Built-In Dishwasher

KDPE234DSS2

Built-In Dishwasher with FreeFlex

Popular Previous Models

KUDC03FXSS2

Built-In Dishwasher

KUDE03FXSS2

Built-In Dishwasher with Controls

KDFE454DSS2

Built-In Dishwasher with ProScrub

KDTM354DSS2

Built-In Dishwasher with PrintShield

Note: For models not listed here, please visit the KitchenAid Support Website for complete documentation.