Installation Guide
Tools Needed:
- Adjustable wrench
- Level
- Screwdrivers (flat and Phillips)
- Pliers
- Tape measure
- Pipe cutter
Step-by-Step Installation
- Prepare Installation Area: Ensure cabinet opening meets required dimensions and has proper electrical and plumbing access.
- Remove Shipping Materials: Remove all protective packaging, tape, and shipping brackets from the dishwasher.
- Connect Water Supply: Connect hot water supply line to the water inlet valve. Use only new braided stainless steel hose.
- Connect Drain Hose: Route the drain hose to drain connection with high loop to prevent backflow into dishwasher.
- Electrical Connection: Connect to a properly grounded 120V, 60Hz, 15A dedicated circuit. Follow local electrical codes.
- Level the Dishwasher: Adjust the leveling legs to ensure the dishwasher is level from front to back and side to side.
- Secure to Countertop: Attach mounting brackets to secure dishwasher to underside of countertop.
- Test Run: Run the dishwasher through a complete cycle to check for leaks and proper operation.
Specifications
| Model Number | KDTE104KPS |
| Type | Built-In Dishwasher |
| Color | PrintShield™ Stainless Steel |
| Place Settings | 14 Place Settings |
| Noise Level | 44 dBA |
| Control Type | Hidden Touch Controls with LED Display |
| Energy Rating | ENERGY STAR® Certified |
| Water Consumption | 2.9 gallons per cycle (Normal Wash) |
| Power Requirements | 120V, 60Hz, 15A |
| Dimensions (HxWxD) | 33.75 x 23.56 x 24.25 inches |
| Weight | 105 lbs |
| Drying System | ProDry™ System with Heated Dry |
Warranty Information
- Full Warranty: 1 year parts and labor
- Stainless Steel Tub Warranty: Limited lifetime warranty
- Racks Warranty: 10 years on stainless steel racks
- Additional Coverage: Optional extended warranty available
For warranty service, contact KitchenAid Customer Service at 1-800-422-1230 or visit KitchenAid.com
Key Features
ProWash™ Cycle
Automatically senses soil levels and adjusts water temperature, wash time, and amount of water used for optimal cleaning performance.
ProDry™ System
Advanced drying system uses a fan and heating element to circulate heated air throughout the interior, delivering thoroughly dry dishes.
Third Level Rack
Extra rack provides additional space for utensils, small plates, and cooking tools, increasing loading capacity and flexibility.
PrintShield™ Finish
Stainless steel exterior resists fingerprints and smudges, maintaining a clean appearance with minimal maintenance.
Hard Food Disposer
Built-in food disposer grinds up food particles during the wash cycle, eliminating the need for pre-rinsing dishes.
Quiet Operation
Sound insulation and advanced motor technology provide quiet operation at just 44 dBA, quieter than normal conversation.
Wash Cycle Options
ProWash
Automatically adjusts cycle based on soil level for optimal cleaning
Heavy
Intensive cleaning for pots, pans, and heavily soiled dishes
Normal
Standard wash for everyday dishes with normal soil levels
Light
Quick wash for lightly soiled dishes and glassware
Rinse Only
Rinses dishes without detergent to prevent drying of food soils
Sanitize
High-temperature wash that reduces 99.9% of bacteria
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Dishwasher won't start | Power issue, door not closed properly, child lock engaged | Check power supply, ensure door is latched completely, check child lock |
| Poor cleaning results | Overloading, wrong detergent, clogged spray arms | Load dishes properly, use correct detergent, clean spray arms |
| Water not draining | Drain hose clogged, air gap blocked, filter dirty | Check drain hose and air gap, clean filter assembly |
| Leaking water | Door not sealed, overfilling, loose connections | Check door seal, ensure proper loading, check connections |
| Unusual noises | Spray arm hitting dishes, foreign objects in pump | Rearrange dishes, check for foreign objects in pump area |
| Dishes not drying | Rinse aid empty, improper loading, heating element issue | Refill rinse aid, load dishes properly, check heating element |
Error Codes
- F1E1: Water fill error - Check water supply and inlet valve
- F2E1: Drain issue - Check drain hose and pump
- F3E1: Heater error - Check heating element and thermostat
- F4E1: Temperature sensor error - Contact service center
- F5E1: Motor control error - Contact service center
- F7E1: Water leak detected - Check for leaks and water supply
Manual Downloads
Current Model Manuals
KDTE104KPS
Built-In Dishwasher with ProWash
KDTE204KPS
Built-In Dishwasher with Top Control
KDTM354KPS
Built-In Dishwasher with Third Rack
KDPE234GPS
Built-In Dishwasher with PrintShield
Popular Previous Models
KUDC03FKSS
Built-In Dishwasher Stainless
KUDE48FXSS
Built-In Dishwasher with Controls
KDFE454DSS
Built-In Dishwasher with Dry Boost
KDTE334GPS
Built-In Dishwasher Black Stainless