Installation Guide
Tools Needed:
- Adjustable wrench
- Level
- Screwdrivers (flat and Phillips)
- Pipe wrench
- Tape measure
- Drill with bits
Step-by-Step Installation
- Prepare Cabinet Opening: Ensure the cabinet opening is clean, level, and meets the required dimensions (24 inches wide, 34.5 inches high, 24 inches deep).
- Remove Shipping Materials: Remove all protective tape, shipping bolts, and packaging materials from the dishwasher.
- Connect Water Supply: Connect the hot water supply line to the water inlet valve. Use only new braided stainless steel supply lines.
- Connect Drain Hose: Route the drain hose to the drain connection with a high loop to prevent backflow into the dishwasher.
- Electrical Connection: Connect to a properly grounded 120V, 60Hz, 15-amp dedicated circuit. Follow local electrical codes.
- Position and Level: Slide the dishwasher into the cabinet opening and adjust the leveling legs to ensure the unit is level and properly aligned.
- Secure to Countertop: Use the mounting brackets to secure the dishwasher to the underside of the countertop.
- Test Run: Run the dishwasher through a complete cycle to check for leaks and proper operation.
Specifications
| Model Number | KDTE204KPS |
| Type | Built-In Dishwasher |
| Color | KitchenAid PrintShield™ Stainless Steel |
| Place Settings | 14 Place Settings |
| Noise Level | 44 dBA |
| Control Type | Hidden Touch Controls with ProWash™ Cycle |
| Energy Rating | ENERGY STAR® Certified |
| Water Consumption | 2.9 gallons per cycle (Normal Wash) |
| Power Requirements | 120V, 60Hz, 15A |
| Dimensions (HxWxD) | 34.5 x 23.8 x 24 inches |
| Weight | 95 lbs |
| Third Rack | Yes - FreeFlex™ Third Rack |
Warranty Information
- Full Warranty: 1 year parts and labor
- Stainless Steel Tub Warranty: 10 years limited
- Racks Warranty: 5 years limited
- Additional Coverage: Optional extended warranty available
For warranty service, contact KitchenAid Customer Service at 1-800-422-1230 or visit KitchenAid.com
Key Features
ProWash™ Cycle
Automatically adjusts water temperature, wash time, and spray arm motion to clean dishes thoroughly while saving energy and water.
FreeFlex™ Third Rack
Adjustable third rack provides extra space for utensils, spatulas, and other small items, with fold-down tines for flexible loading.
PrintShield™ Finish
Stainless steel exterior resists fingerprints and smudges, keeping your dishwasher looking clean with minimal maintenance.
Hard Food Disposer
Built-in hard food disposer eliminates the need for pre-rinsing by grinding up food particles during the wash cycle.
Advanced Clean Water Wash System
Multi-filtration system with hard food disposer and fine mesh filter ensures optimal cleaning performance cycle after cycle.
Quiet Operation
Sound insulation and advanced engineering provide quiet operation at only 44 dBA, making it one of the quietest dishwashers available.
Wash Cycles Explained
ProWash™
Intelligent cycle that automatically adjusts for optimal cleaning of everyday loads
Heavy
Intensive cleaning for pots, pans, and heavily soiled dishes
Normal
Standard wash cycle for everyday dishwashing needs
Light
Quick wash for lightly soiled dishes and glassware
Rinse Only
Rinses dishes without detergent to prevent drying of food particles
Sanitize
High-temperature wash that eliminates 99.9% of household bacteria
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Dishwasher won't start | Power issue, door not latched properly | Check power supply, ensure door is closed completely and latched |
| Poor cleaning results | Overloading, wrong detergent, spray arms blocked | Load dishes properly, use recommended detergent, check spray arms for obstructions |
| Water not draining | Drain hose clogged or kinked, filter blocked | Check drain hose for obstructions, clean filter assembly |
| Leaking water | Door not sealed, overfilling, loose connections | Check door seal, ensure proper detergent amount, check water connections |
| Unusual noises | Spray arm hitting dishes, foreign objects in pump | Rearrange load, check for foreign objects in pump area |
| Dishes not drying | Rinse aid empty, high humidity drying option selected | Refill rinse aid, select heated dry option |
Error Codes
- F1/E1: Water fill issue - Check water supply and inlet valve
- F2/E2: Drain issue - Check drain hose and pump
- F3/E3: Temperature sensor issue - Contact service center
- F4/E4: Heater issue - Contact service center
- F5/E5: Door switch issue - Ensure door is fully closed
- F7/E7: Motor control issue - Contact service center
Manual Downloads
Current Model Manuals
KDTE204KPS
Built-In Dishwasher with ProWash™
KDTE204KBS
Built-In Dishwasher Black Stainless
KDTM354KPS
Top Control Dishwasher
KDPE234GPS
Front Control Dishwasher
Popular Previous Models
KUDC03FKSS
Built-In Dishwasher
KDFE454DSS
Front Control Dishwasher
KDTE104DBL
Built-In Dishwasher Black
KUDE48FXSS
Elevated Third Rack Dishwasher