KitchenAid KDPM354GPS0

User Manual & Installation Guide

Built-In Dishwasher

Installation Guide

Tools Needed:

  • Adjustable wrench
  • Level
  • Screwdrivers (flat and Phillips)
  • Pliers
  • Tape measure
  • Pipe wrench

Step-by-Step Installation

  1. Choose Installation Location: Select a location near necessary plumbing and electrical connections in kitchen cabinetry.
  2. Remove Packaging Materials: Remove all shipping materials and protective coverings from the dishwasher.
  3. Connect Water Supply: Connect hot water supply line to the water inlet valve. Use only new braided stainless steel hoses.
  4. Connect Drain Hose: Route the drain hose into the sink drain or garbage disposal with a high loop to prevent backflow.
  5. Electrical Connection: Connect to a properly grounded 120V, 60Hz, dedicated circuit. Follow local electrical codes.
  6. Level the Dishwasher: Adjust the leveling legs to ensure the dishwasher is level from front to back and side to side.
  7. Secure to Countertop: Use mounting brackets to secure the dishwasher to the underside of the countertop.
  8. Test Run: Run the dishwasher through a complete cycle to check for leaks and proper operation.
Warning: All installations must be performed by a qualified installer to ensure proper operation and maintain warranty coverage.

Specifications

Model Number KDPM354GPS0
Type Built-In Dishwasher
Color PrintShield™ Stainless Steel
Place Settings 14 Place Settings
Noise Level 44 dBA
Control Type Hidden Touch Controls with LED Display
Energy Rating ENERGY STAR® Certified
Water Consumption 2.9 gallons per cycle
Power Requirements 120V, 60Hz, 15A
Dimensions (HxWxD) 34.5 x 23.75 x 24 inches
Weight 105 lbs
Wash Cycles 6 Wash Cycles + 5 Options

Warranty Information

  • Full Warranty: 1 year parts and labor
  • Stainless Steel Tub Warranty: Lifetime limited warranty
  • Additional Coverage: Optional extended warranty available

For warranty service, contact KitchenAid Customer Service at 1-800-422-1230 or visit KitchenAid.com

Key Features

ProWash™ Cycle

Automatically adjusts water temperature, wash time, and spray arm motion to clean dishes thoroughly while saving energy and water.

PrintShield™ Finish

Stainless steel exterior that resists fingerprints and smudges, maintaining a clean appearance with minimal maintenance.

Third Level Rack

Additional upper rack provides extra space for utensils, spatulas, and other small items, maximizing loading capacity.

FreeFlex™ Third Rack

Adjustable third rack with fold-down tines for flexible loading of various sized utensils and kitchen tools.

Hard Food Disposer

Built-in food disposer grinds up food particles, eliminating the need for pre-rinsing dishes before loading.

Advanced Clean Water Wash System

Multi-filtration system with hard food disposer and fine mesh filter to remove food soils from wash water.

Wash Cycles Explained

ProWash

Automatic cycle that senses soil level and adjusts accordingly for optimal cleaning

Heavy

Intensive cleaning for pots, pans, and heavily soiled dishes

Normal

Standard wash cycle for everyday dishwashing needs

Light

Quick wash for lightly soiled dishes and glassware

Rinse Only

Rinses dishes without detergent to prevent drying of food soils

China/Crystal

Gentle cycle for delicate china, crystal, and fine dinnerware

Troubleshooting

Problem Possible Cause Solution
Dishwasher won't start Power issue, door not closed properly, control lock on Check power supply, ensure door is latched completely, check control lock
Poor cleaning results Overloading, wrong detergent, incorrect cycle selection Load dishes properly, use recommended detergent, select appropriate cycle
Water not draining Drain hose clogged or kinked, filter blocked Check drain hose for obstructions or kinks, clean filter assembly
Leaking water Door not sealed, overfilling, loose connections Check door seal, ensure proper detergent amount, check connections
Unusual noises Foreign objects in spray arms, improper loading Check spray arms for obstructions, reload dishes properly
Dishes not drying Rinse aid empty, high humidity drying selected Refill rinse aid, select heated dry option

Error Codes

  • F1E1: Water supply issue - Check water supply and inlet valve
  • F2E1: Drain issue - Check drain hose and pump
  • F3E1: Heating issue - Check heating element and thermostat
  • F4E1: Temperature sensor issue - Contact service center
  • F5E1: Door switch issue - Ensure door is fully closed and latched
  • F7E1: Motor control issue - Contact service center

Manual Downloads

Current Model Manuals

KDPM354GPS0

Built-In Dishwasher with ProWash

KDTM354ESS0

Built-In Dishwasher with Third Rack

KDPE234GPS0

Built-In Dishwasher with PrintShield

KDFE454HPS0

Built-In Dishwasher with FreeFlex Rack

Popular Previous Models

KUDK03CTSS0

Built-In Dishwasher with Hard Food Disposer

KUDE48FXSS0

Built-In Dishwasher with Third Level Rack

KDTE104DSS0

Built-In Dishwasher with ProScrub

KDFE204DSS0

Built-In Dishwasher with FreeFlex Third Rack

Note: For models not listed here, please visit the KitchenAid Support Website for complete documentation.