KitchenAid KDTE204KPS Dishwasher

User Manual & Installation Guide

Built-in Dishwasher

Installation Guide

Tools Needed:

  • Adjustable wrench
  • Level
  • Screwdrivers (flat and Phillips)
  • Pliers
  • Tape measure
  • Pipe thread seal tape

Step-by-Step Installation

  1. Prepare Installation Area: Ensure cabinet opening is clean and level. Standard opening should be 24" wide x 34-1/2" high x 24" deep.
  2. Remove Shipping Materials: Remove all protective packaging, tape, and shipping bolts from the dishwasher.
  3. Connect Water Supply: Connect hot water supply line to the water inlet valve. Use only new braided stainless steel supply line.
  4. Connect Drain Hose: Route drain hose to drain connection with high loop to prevent backflow into dishwasher.
  5. Electrical Connection: Connect to a properly grounded 120V, 60Hz, 15A dedicated circuit. Follow local electrical codes.
  6. Level the Dishwasher: Adjust leveling legs to ensure dishwasher is level from front to back and side to side.
  7. Secure to Countertop: Use mounting brackets to secure dishwasher to underside of countertop.
  8. Test Run: Run dishwasher through a complete cycle to check for leaks and proper operation.
Warning: All installations must be performed by a qualified installer to ensure proper operation and maintain warranty coverage.

Specifications

Model Number KDTE204KPS
Type Built-in Dishwasher
Color PrintShield™ Stainless Steel
Place Settings 14 Place Settings
Noise Level 44 dBA
Control Type Hidden Touch Controls with LED Display
Energy Rating ENERGY STAR® Certified
Water Consumption 2.9 gallons per cycle (Normal Wash)
Power Requirements 120V, 60Hz, 15A
Dimensions (HxWxD) 33-7/8" x 23-7/8" x 24-1/2"
Weight 115 lbs
Wash Cycles 6 Wash Cycles + 5 Options

Warranty Information

  • Full Warranty: 1 year parts and labor
  • Stainless Steel Tub Warranty: Limited lifetime warranty
  • Additional Coverage: Optional extended warranty available

For warranty service, contact KitchenAid Customer Service at 1-800-422-1230 or visit KitchenAid.com

Key Features

ProWash™ Cycle

Automatically senses soil levels and adjusts water temperature, amount, and cycle time for optimal cleaning performance with every load.

PrintShield™ Finish

Stainless steel exterior resists fingerprints and smudges, maintaining a clean appearance with minimal maintenance required.

Third Level Rack

Additional top rack provides extra space for utensils, spatulas, and small items, maximizing loading capacity and flexibility.

FreeFlex™ Third Rack

Adjustable third rack with fold-down tines and varied spacing accommodates different sized items and unusual shapes.

Hard Food Disposer

Built-in hard food disposer eliminates the need for pre-rinsing by grinding up food particles during the wash cycle.

Advanced Clean Water Wash System

Multi-filtration system with hard food disposer and fine mesh filter ensures optimal water circulation and cleaning performance.

Wash Cycles Explained

ProWash

Automatically adjusts cycle based on soil level for optimal cleaning

Normal Wash

Standard cycle for everyday dishes with normal soil levels

Heavy Wash

Intensive cleaning for pots, pans, and heavily soiled items

Light Wash

Gentle cycle for lightly soiled dishes and quick cleaning

Rinse Only

Rinses dishes without detergent to prevent drying of food soils

Crystal/China

Gentle wash with lower water temperature for delicate items

Troubleshooting

Problem Possible Cause Solution
Dishwasher won't start Power issue, door not closed properly, child lock engaged Check power supply, ensure door is latched completely, check child lock
Poor cleaning results Overloading, wrong detergent, incorrect loading Reduce load size, use correct detergent, ensure proper loading
Water not draining Drain hose clogged or kinked, filter blocked Check drain hose for obstructions, clean filter system
Leaking water Door not sealed, overfilling, loose connections Check door seal, ensure proper detergent amount, check connections
Unusual noises Foreign objects in pump, spray arm obstruction Check for foreign objects, ensure spray arms rotate freely
Dishes not drying Rinse aid empty, high humidity drying option selected Refill rinse aid, select heated dry option

Error Codes

  • F1: Water supply issue - Check water supply and inlet valve
  • F2: Drain issue - Check drain hose and pump
  • F3: Temperature sensor issue - Contact service center
  • F4: Heater issue - Contact service center
  • F5: Door switch issue - Ensure door is fully closed
  • F9: Control board communication error - Reset power

Manual Downloads

Current Model Manuals

KDTE204KPS

Built-in Dishwasher with ProWash

KDTE204KBS

Built-in Dishwasher Black Stainless

KDTE204KWS

Built-in Dishwasher White

KDTM354KPS

Top Control Dishwasher

Popular Previous Models

KDTE104KPS

Built-in Dishwasher

KDFE104DPS

Dishwasher with FreeFlex Rack

KUDK03CTSS

Classic Built-in Dishwasher

KUDE03CTSS

Elevated Series Dishwasher

Note: For models not listed here, please visit the KitchenAid Support Website for complete documentation.