Installation Guide
Tools Needed:
- Adjustable wrench
- Screwdrivers (flat and Phillips)
- Level
- Tape measure
- Drill with bits
- Pipe wrench
Step-by-Step Installation
- Prepare Installation Area: Ensure cabinet opening is clean and level. Verify dimensions: 24" width, 34-1/2" height, 24" depth.
- Remove Shipping Materials: Remove all protective packaging, tape, and shipping bolts from the dishwasher.
- Connect Water Supply: Connect hot water supply line to the water inlet valve. Use only new braided stainless steel hose.
- Connect Drain Hose: Route drain hose through cabinet opening and connect to drain line with high loop to prevent backflow.
- Electrical Connection: Connect to a dedicated 120V, 15A, 60Hz grounded electrical circuit. Follow local electrical codes.
- Position and Level: Slide dishwasher into opening and adjust leveling legs to ensure unit is level front to back and side to side.
- Secure to Countertop: Use mounting brackets to secure dishwasher to underside of countertop.
- Test Run: Run dishwasher through a complete cycle to check for leaks and proper operation.
Specifications
| Model Number | KDTE334GPS0 |
| Type | Built-In Dishwasher |
| Color | PrintShield™ Stainless Steel |
| Place Settings | 14 Place Settings |
| Noise Level | 44 dBA |
| Control Type | Hidden Touch Controls with ProWash™ Cycle |
| Energy Rating | ENERGY STAR® Certified |
| Water Consumption | 2.9 gallons per cycle (Normal Wash) |
| Power Requirements | 120V, 60Hz, 15A |
| Dimensions (HxWxD) | 33-7/8" x 23-3/4" x 24-1/2" |
| Weight | 115 lbs |
| Drying System | ProDry™ System with Fan-Assisted Drying |
Warranty Information
- Full Warranty: 1 year parts and labor
- Stainless Steel Tub Warranty: 10 years limited warranty
- Rack Warranty: 5 years limited warranty
- Additional Coverage: Optional extended warranty available
For warranty service, contact KitchenAid Customer Service at 1-800-422-1230 or visit KitchenAid.com
Key Features
ProWash™ Cycle
Automatically senses soil levels and adjusts water temperature, wash time, and spray motions for optimal cleaning performance with minimal water usage.
ProDry™ System
Advanced drying system uses a fan and heating element to circulate heated air throughout the tub, ensuring dishes dry completely without water spots.
Third Level Rack
Extra upper rack provides additional space for utensils, small plates, and cooking tools, increasing capacity to 14 place settings.
PrintShield™ Finish
Stainless steel exterior resists fingerprints and smudges, maintaining a clean appearance with minimal maintenance.
FreeFlex™ Third Rack
Adjustable third rack with fold-down tines provides flexible loading options for various utensil sizes and types.
Hard Food Disposer
Built-in hard food disposer grinds up food particles, eliminating the need for pre-rinsing dishes before loading.
Wash Cycle Options
ProWash
Automatic cycle that senses soil level and adjusts accordingly for everyday cleaning
Heavy
Intensive cleaning for pots, pans, and heavily soiled dishes
Normal
Standard wash cycle for everyday dishware with normal soil levels
Light
Quick wash for lightly soiled dishes and glassware
Rinse Only
Rinses dishes without detergent to prevent dried-on food
China/Crystal
Gentle cycle for delicate china, crystal, and fine glassware
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Dishwasher won't start | Door not latched, power issue, child lock engaged | Ensure door is closed completely, check power supply, verify child lock status |
| Poor cleaning results | Overloading, incorrect detergent, spray arms blocked | Rearrange load properly, use recommended detergent, check spray arm rotation |
| Water not draining | Drain hose clogged, air gap blocked, filter dirty | Check drain hose for obstructions, clean air gap, clean filter assembly |
| Leaking water | Door not sealed, overfilling, loose connections | Check door gasket, ensure proper loading, check water connections |
| Unusual noises | Spray arm hitting dishes, foreign objects in pump | Rearrange load to prevent obstruction, check for foreign objects |
| Dishes not drying | Rinse aid empty, high humidity, incorrect cycle | Refill rinse aid, use heated dry option, select appropriate cycle |
Error Codes
- F1: Water fill issue - Check water supply and inlet valve
- F2: Drain issue - Check drain hose and pump
- F3: Temperature sensor issue - Contact service center
- F4: Heater issue - Contact service center
- F5: Door switch issue - Ensure door is fully closed
- F7: Motor control issue - Contact service center
Manual Downloads
Current Model Manuals
KDTE334GPS0
Built-In Dishwasher with ProWash™
KDTE334GPS1
Built-In Dishwasher with Third Rack
KDTM354GPS0
Built-In Dishwasher with Top Control
KDTE334GSS0
Built-In Dishwasher Stainless Steel
Popular Previous Models
KDTE204GPS0
Built-In Dishwasher 24"
KUDE706PSS0
Built-In Dishwasher Pro
KDFE454DSS0
Built-In Dishwasher with FreeFlex
KDTM354DSS0
Built-In Dishwasher Top Control