Installation Guide
Tools Needed:
- Adjustable wrench
- Level
- Screwdrivers (flat and Phillips)
- Pipe wrench
- Tape measure
- Drill with bits
Step-by-Step Installation
- Prepare Installation Area: Ensure cabinet opening meets required dimensions and is level. Remove any existing dishwasher if present.
- Electrical Connection: Connect to a dedicated 120V, 15A, 60Hz circuit with proper grounding. Follow local electrical codes.
- Water Supply Connection: Install water supply line using 3/8" compression fitting. Include a shut-off valve for maintenance.
- Drain Connection: Connect drain hose to sink drain or garbage disposal with proper air gap installation to prevent backflow.
- Position Dishwasher: Carefully slide dishwasher into cabinet opening, ensuring water and electrical connections are properly aligned.
- Level and Secure: Adjust leveling legs and secure dishwasher to countertop or adjacent cabinets using mounting brackets.
- Final Connections: Connect water supply line, drain hose, and electrical connection. Check all connections for leaks.
- Test Operation: Run the dishwasher through a test cycle to verify proper operation and check for leaks.
Specifications
| Model Number | KDTM604KPS |
| Type | Built-in Dishwasher |
| Color | PrintShield™ Stainless Steel |
| Place Settings | 14 Place Settings |
| Noise Level | 44 dBA |
| Control Type | Hidden Touch Controls with LED Display |
| Energy Rating | ENERGY STAR® Certified |
| Water Consumption | 2.9 gallons per cycle (Normal Wash) |
| Power Requirements | 120V, 60Hz, 15A |
| Dimensions (HxWxD) | 33.75 x 23.56 x 24.13 inches |
| Cutout Dimensions | 34.5 x 24 x 24 inches (recommended) |
| Wash Cycles | 6 Wash Cycles + 5 Options |
Warranty Information
- Full Warranty: 1 year parts and labor
- Stainless Steel Tub Warranty: 10 years limited
- Racks Warranty: 5 years limited
- Additional Coverage: Optional extended warranty available
For warranty service, contact KitchenAid Customer Service at 1-800-422-1230 or visit KitchenAid.com
Key Features
ProWash™ Cycle
Automatically adjusts water temperature, amount, and cycle time to deliver optimal cleaning results for each load.
PrintShield™ Finish
Stainless steel exterior resists fingerprints and smudges, maintaining a clean appearance with minimal maintenance.
Third Level Rack
Additional top rack provides extra space for utensils, measuring spoons, and other small items, increasing loading capacity.
FreeFlex™ Third Rack
Adjustable third rack with fold-down tines accommodates taller items while maintaining optimal spray pattern coverage.
Hard Food Disposer
Built-in food disposer grinds up food particles, eliminating the need for pre-rinsing dishes before loading.
Advanced Clean Water Wash System
Filtration system with hard food disposer and multiple wash arms ensures thorough cleaning throughout the tub.
Wash Cycles Explained
ProWash
Automated cycle that senses soil level and adjusts for optimal cleaning
Heavy
Intensive cleaning for pots, pans, and heavily soiled dishes
Normal
Standard cycle for everyday dishes with normal soil levels
Light
Quick cycle for lightly soiled dishes and glassware
Rinse Only
Rinses dishes to prevent drying of food particles until full load is ready
Crystal/China
Gentle cycle for delicate items, fine china, and crystal glassware
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Dishwasher won't start | Power issue, door not latched properly | Check power supply, ensure door is closed completely and latched |
| Poor cleaning results | Overloading, incorrect detergent, spray arms blocked | Rearrange load, use recommended detergent, check spray arms for obstructions |
| Water not draining | Drain hose clogged or kinked, filter blocked | Check drain hose, clean filter assembly, ensure proper installation |
| Leaking water | Door not sealed, overfilling, loose connections | Check door seal, ensure proper detergent amount, check water connections |
| Unusual noises | Spray arm hitting dishes, foreign objects in pump | Rearrange load, check for foreign objects in filter and pump area |
| Dishes not drying | Rinse aid empty, improper loading, heating element issue | Refill rinse aid, rearrange load for better air circulation, check heating element |
Error Codes
- F1/E1: Water fill issue - Check water supply and inlet valve
- F2/E2: Drain issue - Check drain hose and pump
- F3/E3: Temperature sensor issue - Check sensor operation
- F4/E4: Heater issue - Check heating element and connections
- F5/E5: Door switch issue - Ensure door is properly closed and latched
- F7/E7: Motor control issue - Contact service center
Manual Downloads
Current Model Manuals
KDTM604KPS
Built-in Dishwasher with ProWash
KDTE504GPS
Built-in Dishwasher with Third Rack
KDTM404KPS
Built-in Dishwasher PrintShield
KDPE234GPS
Built-in Dishwasher with FreeFlex
Popular Previous Models
KDTE354ESS
Built-in Dishwasher Stainless
KDFE454DSS
Built-in Dishwasher with Controls
KUDE48FXSS
Built-in Dishwasher Ultra Wash
KDFE204DSS
Built-in Dishwasher Basic Model