Repair Manual for KitchenAid Dishwasher

Service Manual & Troubleshooting Guide

Built-in & Portable Models

Installation Guide

Tools Needed:

  • Adjustable wrench
  • Level
  • Screwdrivers (flat and Phillips)
  • Pipe wrench
  • Tape measure
  • Drill with bits

Step-by-Step Installation

  1. Prepare Installation Area: Ensure cabinet opening is properly sized and has adequate clearance for water and drain connections.
  2. Remove Shipping Materials: Remove all protective packaging, shipping bolts, and tape from the dishwasher.
  3. Connect Water Supply: Connect hot water supply line to the dishwasher inlet valve using approved water supply line.
  4. Connect Drain Hose: Route drain hose to drain connection with high loop to prevent backflow into dishwasher.
  5. Electrical Connection: Connect to dedicated 120V, 15A circuit with proper grounding. Follow local electrical codes.
  6. Level the Dishwasher: Adjust leveling legs to ensure dishwasher is level from front to back and side to side.
  7. Secure to Countertop: Attach mounting brackets to secure dishwasher to underside of countertop.
  8. Test Run: Run dishwasher through a complete cycle to check for leaks and proper operation.
Warning: All installations must be performed by a qualified installer to ensure proper operation and maintain warranty coverage.

Specifications

Model Series KDTE104DSS / KDTM354DSS
Type Built-in Dishwasher
Color Stainless Steel / Black / White
Place Settings 14 place settings
Noise Level 44 dBA (Quiet Series)
Control Type Touch Controls with Hidden Display
Energy Rating ENERGY STAR® Certified
Water Consumption 2.9 gallons per cycle
Power Requirements 120V, 60Hz, 15A
Dimensions (HxWxD) 34.5 x 23.8 x 24.5 inches
Weight 95 lbs
Wash Cycles 5 wash cycles + options

Warranty Information

  • Full Warranty: 1 year parts and labor
  • Extended Warranty: 5 years on stainless steel tub
  • Additional Coverage: Optional extended warranty available

For warranty service, contact KitchenAid Customer Service at 1-800-422-1230 or visit KitchenAid.com

Key Features

ProWash™ Cycle

Automatically adjusts water temperature, wash time, and spray arm motion to clean dishes based on soil level for optimal cleaning performance.

Third Level Rack

Additional top rack provides extra space for utensils, spatulas, and small items, increasing loading capacity and flexibility.

FreeFlex™ Third Rack

Adjustable third rack with fold-down tines allows for customized loading of various sized items and utensils.

Stainless Steel Interior

Durable stainless steel tub resists stains, odors, and chipping while providing superior cleaning performance and longevity.

Hard Food Disposer

Built-in hard food disposer grinds up food particles, eliminating the need for pre-rinsing dishes before loading.

Quiet Operation

Advanced sound insulation and precision engineering provide quiet operation as low as 44 dBA.

Wash Cycles Explained

ProWash

Automatically adjusts cycle based on soil level for everyday cleaning

Heavy

Intensive cleaning for pots, pans, and heavily soiled dishes

Normal

Standard cycle for regular daily dishwashing needs

Light

Quick cycle for lightly soiled dishes and glassware

Rinse Only

Rinses dishes without detergent to prevent drying

Sanitize

High-temperature cycle that eliminates 99.9% of bacteria

Troubleshooting

Problem Possible Cause Solution
Dishwasher won't start Power issue, door not latched, control lock activated Check power supply, ensure door latches completely, check control lock
Poor cleaning results Spray arm obstruction, clogged filter, incorrect detergent Clean spray arms, clean filter, use recommended detergent
Water not draining Drain hose clogged, air gap blocked, pump issue Check drain hose, clean air gap, inspect drain pump
Leaking water Door seal damaged, overfilling, loose connections Inspect door gasket, check float switch, tighten connections
Unusual noises Spray arm obstruction, foreign objects, worn pump Check for obstructions, remove foreign objects, inspect pump
Dishes not drying Rinse aid empty, heating element failure, wet load setting Refill rinse aid, check heating element, adjust settings

Error Codes

  • F1/E1: Water fill issue - Check water supply and inlet valve
  • F2/E2: Drain issue - Check drain hose and pump
  • F3/E3: Temperature sensor issue - Check thermistor
  • F4/E4: Heating element issue - Check heater and wiring
  • F5/E5: Door switch issue - Check door latch mechanism
  • F7/E7: Motor control issue - Contact service center

Manual Downloads

Current Model Manuals

KDTE104DSS

Built-in Dishwasher with ProWash

KDTM354DSS

Built-in Dishwasher with Third Rack

KDPE234GPS

Built-in Dishwasher with PrintShield

KDFE104DSS

Built-in Dishwasher with FreeFlex

Popular Previous Models

KUDK03CTSS

Built-in Dishwasher with Controls on Top

KUDE48FXSS

Built-in Dishwasher with CrystalDry

KUDL25ICSS

Built-in Dishwasher with LED Lights

KUDC10KSSS

Built-in Dishwasher with Stainless Tub

Note: For models not listed here, please visit the KitchenAid Support Website for complete documentation.